Painting wheel wells and underside

[87R10]

What do you guys use to spray the insides of your wheel houses and underneath the cab floor etc? I'm thinking about using something tough like stone guard... Wondering what you guys use....

 

[robert8096]

I used this on the inside wheel wells, underside hood and cab. It's cheep and easy to touch up.

http://www.homedepot.com/p/Rust-Oleum-Automotive-15-oz-Truck-Bed-Coating-Black-Spray-Paint-248914/202097787

 

[MrMarty51]

I used this on the inside wheel wells, underside hood and cab. It's cheep and easy to touch up.

http://www.homedepot.com/p/Rust-Oleum-Automotive-15-oz-Truck-Bed-Coating-Black-Spray-Paint-248914/202097787

Gives them that fresh OEM appearance too.

 

[m1000snopro]

I used this on the inside wheel wells, underside hood and cab. It's cheep and easy to touch up.

http://www.homedepot.com/p/Rust-Oleum-Automotive-15-oz-Truck-Bed-Coating-Black-Spray-Paint-248914/202097787

how long did you do this and how is holding up so far? It turned out really good

 

[Skweegle89]

My dad just bought some of that deckover for his deck. It's like super thick bedliner for decks and patios. It bonds to concrete and wood,
But curious as to how it would bond with metal. It's only $80 for a 5 gallon bucket.


Sent from my iPhone using Tapatalk

 

[89Suburban]

I used this on the inside wheel wells, underside hood and cab. It's cheep and easy to touch up.

http://www.homedepot.com/p/Rust-Oleum-Automotive-15-oz-Truck-Bed-Coating-Black-Spray-Paint-248914/202097787

I see you like silver underneath too. Makes it easier to see and looks good imo.

 

[robert8096]

how long did you do this and how is holding up so far? It turned out really good

About a year ago, holds up good. Did it on a few cars, prep work is the key. If it does get chipped I just spray a little over the chip.

I see you like silver underneath too. Makes it easier to see and looks good imo.

Big silver and red fan.