chevyman73
Junior Member
- Joined
- May 6, 2011
- Posts
- 3
- Reaction score
- 3
- Location
- concord CA
- First Name
- Mario
- Truck Year
- 1973
- Truck Model
- c10
- Engine Size
- 350
My question is I have a 1973 short bed c10 I put 2.5 inch spindles and 2inch springs on the front the rear I did the shackles and hanger kit. But the problem is the front is lower so makes the truck have that raked look I want it even so I need to lower the back. The thing is i heard if I flip it with the shackles and hanger it would be too low and I do not have the factory hangers so not a option but can I take the shackles off and put factory back on and yhen flip with hangers to.