- Joined
- Feb 22, 2022
- Posts
- 236
- Reaction score
- 458
- Location
- Spartanburg SC
- First Name
- Geoff
- Truck Year
- 1985
- Truck Model
- C10
- Engine Size
- 305
That’s nothing. The latest c10 I bought had a pair of vice grips holding the bumper to the frame horn.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yes but your truck wasn't built on a tv show claiming it was a 6 figure truck and "the best c10 in the world" then half assed attempted rebuild from a youtuber who got in over his headThat’s nothing. The latest c10 I bought had a pair of vice grips holding the bumper to the frame horn.
Many of the issues he's run into thus far were caused by Alex and his attempt to rebuild it. Who knows how good the truck was prior to the wreck. We know that the gauge cluster was a hacked up POS but that's all we know about the pre-wreck truck.
Not surprisingly, Alex started 'final assembly' with all the suspension stuff without making sure the frame was 100% back in alignment it appears. Wonder how well it fit prior than the collision?
Did he ever say how much he bought the wreck for? For all what he's doing it seems he could have built a new one from scratch with less hassles.
Ah yes. I’d forgotten that. Been so long and I’d never gone back for a refresherThe frame it was on from GMG was trashed in the wreck. Doing a back half an the steering notches in the front for the rack apparently weakened it alot. Alex got a donor truck (which honestly wasn't in bad shape) to start the rebuild on a new frame.
Seeing this truck after the accident is why I'll never build one that lays frame on a stock chassis. Aftermarket all the way. We all know how flimsy these frames are to begin with. I'm sure the speed an angle of the hit in the accident didn't help but man it didn't hold up at all...
This makes sense now. I forgot about the first attempt.Many of the issues he's run into thus far were caused by Alex and his attempt to rebuild it. Who knows how good the truck was prior to the wreck. We know that the gauge cluster was a hacked up POS but that's all we know about the pre-wreck truck.
Not surprisingly, Alex started 'final assembly' with all the suspension stuff without making sure the frame was 100% back in alignment it appears. Wonder how well it fit prior than the collision?
I'm going to watch this on my lunch break today. I've been off the net for about a week now so I missed this onexc_hide_links_from_guests_guests_error_hide_media
Saw it yesterday. Pretty decent one.Haven't had time to watch this one myself yet but it's out.
xc_hide_links_from_guests_guests_error_hide_media