- Joined
- Aug 29, 2010
- Posts
- 47,014
- Reaction score
- 9,014
- Location
- OKC, OK
- First Name
- HotRod
- Truck Year
- 85 K20 LWB
- Truck Model
- Silverado
- Engine Size
- 454 - Turbo 400 - 3.73
I'm pulling this from the 91 Burb R1500. I'm removing the frame rivets for the brackets too. I'm not sure if the brackets are the same for 73-80, but I'm certain these will fit all 81-91 1/2 and 3/4 ton squares. So if you have a 2wd Burb, Pick Up or even Blazer and it didn't come with a front sway bar, here you go.
Get you 4 hardened bolts, nuts and washers with a little loctite and bolt these brackets to your frame that is already drilled from them, and so are your Lower Control Arms and install this. It does certainly make a huge difference in cornering. I never realized how big of a difference it made til I drove one without it. I actually thought something was wrong with this truck. I got under to check it out and seen it didn't have a Sway bar.
$50 for all of it, plus shipping which might be a bit steep due to weight and size. If you have a bar and just need the bracketry, clamps and bolts. $40 and shipping will be alot less.
I'll include the bushings too. Bare in mind, they're used but seem to be about an 8 of 10 and still have some life left in them. They're normally $12 for each set if want to buy brand new ones. Oh and 1 last thing, you get to clean the parts too if you want them clean and pretty.
Get you 4 hardened bolts, nuts and washers with a little loctite and bolt these brackets to your frame that is already drilled from them, and so are your Lower Control Arms and install this. It does certainly make a huge difference in cornering. I never realized how big of a difference it made til I drove one without it. I actually thought something was wrong with this truck. I got under to check it out and seen it didn't have a Sway bar.
$50 for all of it, plus shipping which might be a bit steep due to weight and size. If you have a bar and just need the bracketry, clamps and bolts. $40 and shipping will be alot less.
I'll include the bushings too. Bare in mind, they're used but seem to be about an 8 of 10 and still have some life left in them. They're normally $12 for each set if want to buy brand new ones. Oh and 1 last thing, you get to clean the parts too if you want them clean and pretty.
