crazy4offroad
Equal Opportunity Destroyer
- Joined
- Jul 30, 2010
- Posts
- 8,468
- Reaction score
- 1,070
- Location
- West BY-GOD Virginia
- First Name
- Curt
- Truck Year
- 1979
- Truck Model
- K-10
- Engine Size
- 350/SM465/NP205
Post some pics of yours.
front driveline
- Thread starter Roughneck714
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Roughneck714
Full Access Member
- Joined
- Oct 2, 2012
- Posts
- 137
- Reaction score
- 9
- Location
- Vacaville
- First Name
- John
- Truck Year
- 1984
- Truck Model
- K30
- Engine Size
- 6.2 Diesel
GreaseDog
Full Access Member
- Joined
- Aug 8, 2010
- Posts
- 1,189
- Reaction score
- 32
- Location
- Elkhart, IN
- First Name
- Jeremy
- Truck Year
- 1977 K20
- Truck Model
- 1980 K2500
- Engine Size
- 350
205. What's the front output look like? Flange or yoke?
Roughneck714
Full Access Member
- Joined
- Oct 2, 2012
- Posts
- 137
- Reaction score
- 9
- Location
- Vacaville
- First Name
- John
- Truck Year
- 1984
- Truck Model
- K30
- Engine Size
- 6.2 Diesel
crazy4offroad
Equal Opportunity Destroyer
- Joined
- Jul 30, 2010
- Posts
- 8,468
- Reaction score
- 1,070
- Location
- West BY-GOD Virginia
- First Name
- Curt
- Truck Year
- 1979
- Truck Model
- K-10
- Engine Size
- 350/SM465/NP205
Correct.
Roughneck714
Full Access Member
- Joined
- Oct 2, 2012
- Posts
- 137
- Reaction score
- 9
- Location
- Vacaville
- First Name
- John
- Truck Year
- 1984
- Truck Model
- K30
- Engine Size
- 6.2 Diesel
crazy4offroad
Equal Opportunity Destroyer
- Joined
- Jul 30, 2010
- Posts
- 8,468
- Reaction score
- 1,070
- Location
- West BY-GOD Virginia
- First Name
- Curt
- Truck Year
- 1979
- Truck Model
- K-10
- Engine Size
- 350/SM465/NP205
Sm465
GreaseDog
Full Access Member
- Joined
- Aug 8, 2010
- Posts
- 1,189
- Reaction score
- 32
- Location
- Elkhart, IN
- First Name
- Jeremy
- Truck Year
- 1977 K20
- Truck Model
- 1980 K2500
- Engine Size
- 350
Well, my driveshaft won't work then, it's for the yoke style front output.
- Joined
- Aug 29, 2010
- Posts
- 47,014
- Reaction score
- 9,014
- Location
- OKC, OK
- First Name
- HotRod
- Truck Year
- 85 K20 LWB
- Truck Model
- Silverado
- Engine Size
- 454 - Turbo 400 - 3.73
So you have a Dana 60 front axle with a 1350 U joint up front??? C4 maybe able to confirm that. For a quick patch job, I'd imagine you could get by with a 1/2 or 3/4 ton front driveshaft and use a combo U joint to the front axle. The SM465/NP205 is not all that uncommon. It's the 1 ton front Dana 60 that's got you by the balls I think.
Is your driveshaft completely missing or just in need of repair or what?
Is your driveshaft completely missing or just in need of repair or what?
crazy4offroad
Equal Opportunity Destroyer
- Joined
- Jul 30, 2010
- Posts
- 8,468
- Reaction score
- 1,070
- Location
- West BY-GOD Virginia
- First Name
- Curt
- Truck Year
- 1979
- Truck Model
- K-10
- Engine Size
- 350/SM465/NP205
Some D60s have 1310 pinion u-joint, like mine right now, but upgradeable to 1350. If you're looking for the upgrade get a Dodge 2500 front driveshaft from a 2005-up truck. Not sure what the upper limit is on years, that's just what I heard. They have 35+ degree running angle of the double cardan joint, and 1350 u-joints throughout.
To be able to go with Jeremy's driveshaft you need a front output yoke from a 73-77 (maybe 73-76) truck. This is what I'm running now. You could use this front yoke...
http://www.dennysdriveshaft.com/p1307_cv_yoke_1310_series_10_spline_for_np205_front_output.html
...IF you have a 10-spline front output, which I dont think you do. I think 203s have 10 splines, 205s have 27 splines, you should count them to be sure. I went with the F*rd 32 spline front output shaft mod for NP205 so I could run rear yokes on the front. It opens up your options to 1350 and 1410 if you want to run much larger u-joints. Just have to swap in a rear yoke seal in the front to make it work.
To be able to go with Jeremy's driveshaft you need a front output yoke from a 73-77 (maybe 73-76) truck. This is what I'm running now. You could use this front yoke...
http://www.dennysdriveshaft.com/p1307_cv_yoke_1310_series_10_spline_for_np205_front_output.html
...IF you have a 10-spline front output, which I dont think you do. I think 203s have 10 splines, 205s have 27 splines, you should count them to be sure. I went with the F*rd 32 spline front output shaft mod for NP205 so I could run rear yokes on the front. It opens up your options to 1350 and 1410 if you want to run much larger u-joints. Just have to swap in a rear yoke seal in the front to make it work.
Roughneck714
Full Access Member
- Joined
- Oct 2, 2012
- Posts
- 137
- Reaction score
- 9
- Location
- Vacaville
- First Name
- John
- Truck Year
- 1984
- Truck Model
- K30
- Engine Size
- 6.2 Diesel
Yeah hotrod. The dang scrap metal guy came round and snagged it. I jad it out replacing u joints. And he snaked it off the ground with the rest of the juck
