Battery corrosion.
- Thread starter bigcountry78
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
73c20jim
Full Access Member
- Joined
- Jun 11, 2018
- Posts
- 2,282
- Reaction score
- 2,926
- Location
- Tombstone, AZ
- First Name
- Jim
- Truck Year
- 1973, 1973
- Truck Model
- C20 2WD Custom Deluxe. C10 2WD Base Model
- Engine Size
- 350 CID 195/260 HP Goodwrench crate, 400 CID 2bbl
Turn meter on. Switch to volts. Switch to DC volts. Touch red to Positive and black to ground. Read meter.
Frankenchevy
Proverbs 16:18
- Joined
- Jan 3, 2018
- Posts
- 6,072
- Reaction score
- 7,734
- Location
- USA
- First Name
- Jeremy
- Truck Year
- Square
- Truck Model
- CUCV
- Engine Size
- Small
Set multimeter to VDC. Sometimes symbolized as a dash with dots over it as opposed to a teal (~), which is VAC.
Hook black lead to batt (-) or any good ground.
With engine running and at warm idle, touch red lead to batt (+).
Shouldn’t read more than +15v or less than +12v. At idle it’s probably high 12-14ish.
You can also do a simple test on the battery the same way, but without the engine running.
Hook black lead to batt (-) or any good ground.
With engine running and at warm idle, touch red lead to batt (+).
Shouldn’t read more than +15v or less than +12v. At idle it’s probably high 12-14ish.
You can also do a simple test on the battery the same way, but without the engine running.
bigcountry78
Full Access Member
- Joined
- Apr 16, 2013
- Posts
- 3,676
- Reaction score
- 8,794
- Location
- Hickory, North Carolina
- First Name
- James
- Truck Year
- 1978
- Truck Model
- K10 Custom Deluxe
- Engine Size
- 350
Well apparently I have 2 meters. I don’t even know where the yellow one came from
You must be registered for see images attach
bigcountry78
Full Access Member
- Joined
- Apr 16, 2013
- Posts
- 3,676
- Reaction score
- 8,794
- Location
- Hickory, North Carolina
- First Name
- James
- Truck Year
- 1978
- Truck Model
- K10 Custom Deluxe
- Engine Size
- 350
See above
bigcountry78
Full Access Member
- Joined
- Apr 16, 2013
- Posts
- 3,676
- Reaction score
- 8,794
- Location
- Hickory, North Carolina
- First Name
- James
- Truck Year
- 1978
- Truck Model
- K10 Custom Deluxe
- Engine Size
- 350
If I’m reading the meter right, I’m getting 12.4 volts with the truck idling. The battery case isn’t cracked from what I can see. I put a ton of baking soda in there and let it sit overnight. Rinsed it out and put some more soda in the bottom of the tray in an effort to catch any more acid runoff. I guess I’ll have to keep an eye on it and see what happens. When I have more time I’ll repaint the battery tray.
Similar threads
