Sean2202
Junior Member
- Joined
- Jul 10, 2017
- Posts
- 4
- Reaction score
- 1
- Location
- CT
- First Name
- Sean
- Truck Year
- 1976
- Truck Model
- K20
- Engine Size
- 350
Greetings, I was looking for some advice on tires and rims. What I have is a K20 and I believe it may have a 4 inch lift on it. It was that way when I purchased it. There are blocks in the rear under the springs that measure 3 1/2 inches and there is heavy springs on the front. The current wheels were on it when I purchased it and are of unknown brand. They are OK but I was looking for something with a little more offset so I can run a wider tire. I only drive this truck about 1,000 miles per year so I was considering a beefy mud tire for fun. The tire needs to have a good load rating because I do carry heavy weight in the box from time to time. So what rim offset can I run with a 4" lift with a mud tire without rubbing on the fender? Currently I run 285/75/16 BF Goodrich all terrains that have plenty of tread but sidewalls are getting dry rotted. They are over 12 years old.
Anyone have any luck with these?
https://www.ebay.com/itm/4-New-Thun...RBbT2CC:sc:ShippingMethodStandard!06040!US!-1
Anyone have any luck with these?
https://www.ebay.com/itm/4-New-Thun...RBbT2CC:sc:ShippingMethodStandard!06040!US!-1
You must be registered for see images attach