Stroketech
Junior Member
- Joined
- May 15, 2018
- Posts
- 2
- Reaction score
- 0
- Location
- MN
- First Name
- Jon
- Truck Year
- 1980
- Truck Model
- C10
- Engine Size
- 5.0
I'm about to start installing my lowering kit on my 1980 C10. After inspecting it tonight it became pretty clear that the easiest way to get the 3 front rivets on the spring hangers is to lift the box off. There is only about an inch between the rear of the fuel tank and the front of the hanger. Anyone with a better way to get at those 3 rivets on each side that might save me the time of taking the box off?