-
-
RThanks In hindsight I wish I would've worked harder to get the plastic electrical connector out on the old valve. It was snapped off and...
-
RRicko1966 posted the thread Edelbrock Carbureators,and Chinese Distribuors etc.etc. in Tech Discussion.Okay I was on 3rd gen the other day and there was a guy on there, he pulled his factory Qjet replaced it with a new Edelbrock went to...
-
-
RRicko1966 replied to the thread 77 rpm issue.Yea,put a vacuum gauge on it,see what your vacuum readings are,don't forget to check for plugged exhaust with vacuum gauge. Drive it...
-
RGuess I'm old because I can read an analog clock.
-
RYou've got a good parts store for sure.
-
RThe store I go to has books, and they do use them for old stuff or oddball parts
-
RReading? Books? I suppose you can look at an analog clock and know what time it is too! Kids today...
-
RRicko1966 replied to the thread Proportioning valve problems.As long as you have the centering tool in before you start bleeding the brakes is all you need so anytime between opening the box and...
-
RHeader flange thickness is directly related to gasket sealing success. Thin flanges can get warped easily, thick flanges seal better for...
-
ROk so there is a switch that is on the gas pedal mount where when you push the gas all the way down it hits that switch that must be the...
-
RRicko1966 reacted to DoubleDingo's post in the thread Ignition Resistance Wire-Needed or Nah with
Like.
But you don't know the system...oh wait, you do -
RRicko1966 replied to the thread Finding Serpentine Belt Lengths.Cut the belt,overlap the ends 2 inches,clamp it with vice grips,now try to install the belt. Too short? Too long? Move your overlaps.Now...
-
RI would measure with the tensioner in the mid range and go with the closest sized belt available. That way you have some range to work...
-
REdit- posted in wrong thread.
-
RRicko1966 replied to the thread Ignition Resistance Wire-Needed or Nah.He needs relays for the other things he's trying to run,fuel pump and electric choke And if he wants to run a second fuse box as he...
-
-
Loading…
-
Loading…
