Search results

  1. bluex

    What have you done to your square lately??

    I bought one of these an it's been the best money I've spent on a tool in a while. Works great, I didn't even need a breaker bar an it stopped out a parts store puller like your first one an didn't even budge....
  2. bluex

    Wheel and tire size help!!

    Measure what clearance you have now. A 3/4 drop will probably just close up the gap you have to the tire now. If you stay at a 3/4 drop a 30/31" tall tire will still be fine. 27" tires on the front are what you need for a 4 or 5" drop. I run a 30.5" (295/45/20) tall rear tire on my air ride...
  3. bluex

    Wheel and tire size help!!

    I'm not mad, it's just the typical bad info an opinion of "don't ruin a truck by lowering it" bs that's spouted all over the place by people that don't or have never had lowered trucks.... These trucks have been around an been lowered forever now. The "engineering" has been done for decades...
  4. bluex

    Wheel and tire size help!!

    It's not good for it that's for sure. Get the brackets off asap an use a low profile urethane bump stop.
  5. bluex

    Wheel and tire size help!!

    SMH, This is all nonsense, OP please ignore it... Well the links are helpful but the rest isnt...
  6. bluex

    Wheel and tire size help!!

    No difference on inners between 10/20/30. Only difference is 73-80 and 81+. 73-80 inners will give a little more room on an 81+.
  7. bluex

    Wheel and tire size help!!

    Everything mentioned in this thread will also apply to a C20/C30. Thread 'Wanna slam that 63-98 C10/C1500? Lets talk about it!' https://www.gmsquarebody.com/threads/wanna-slam-that-63-98-c10-c1500-lets-talk-about-it.38131/
  8. bluex

    Wheel and tire size help!!

    1. Depends on how you want to use the truck. A flip can be done without a notch, but if you plan use it to it capacity it will bottom out on the axle sooner. 2. On a 3/4 drop you can pretty much stick with the same overall height tire as stock.
  9. bluex

    OBS seats in your Square. Who done it, Whats needed?

    Get an extra set of brackets off a bench. Take off all the obs bracket an sliders so you have just the seat. Put the square sliders on it, bend the tab on the inside rear to match the floor an drill a hole. Build a bracket to mount the front inner mount. That's how I did my 60/40. Or build...
  10. bluex

    Cowl Hood

    Nope, mine was Carolina Truck Shop. I'm no longer there though an they are no longer selling parts. We did sell the Key Parts hoods though. They were well made an we never had any major fitment issues out of them. They were functional but have factory style bracing on the other side.
  11. bluex

    What have you done to your square lately??

    Do you know where the block an hardline came from or was it part if the kit. I had to have a S10 line set modified for my vintage air setup because I couldn't find anything like that.
  12. bluex

    Where do I buy new interior kit?

    Not sure if they do a whole kit but look at Cheyenne pickup parts. They make a really nice dash at least.
  13. bluex

    Lowering

    This is a very open ended question. Are you looking for a basic get it on air type thing, or do you want it to lay frame or even rocker? What's your budget?
  14. bluex

    Old77's Jeep Thread

    :shrug: This one was silver someone raptor liner it white because they put red power doors on it. I don't understand that unless the stock doors were beat up. Why they didn't just change the guts over is a mystery. This was the best part :lol: It's a decent truck otherwise. Has a bored...
  15. bluex

    Old77's Jeep Thread

    These things just multiply somehow :shrug: Cleaning this one up for a buddy. Wheel polish (farmed out lol) interior refresh and door jamb painting. Of course it's snowballing like always too. :doh2:
  16. bluex

    Old77's Jeep Thread

    Just bring me the dually an I'll get it all handled for ya :cool:
  17. bluex

    Lsfab gate saver

    The tre5 latch kit fixes that issue an is 1000% worth it...
  18. bluex

    Old77's Jeep Thread

    I DO NOT approve of this message :sad72:
  19. bluex

    Old77's Jeep Thread

    Man that stinks, glad you guys are ok. My daughter has been begging for a Jeep for a while an that's the main reason why I won't get her one.
  20. bluex

    Lsfab gate saver

    I have one but my bed is off a 75. Either way just watch their video on it. It's pretty detailed an did a good job explaining everything imo.
  21. bluex

    Brake hose issues with lowered front end C30

    It's common issue with all drop spindles. Just gently bend the line away until it has clearance to the ball joint nut an spindle.
  22. bluex

    What have you done to your square lately??

    Same :sad72:
  23. bluex

    What have you done to your square lately??

    You gotta be careful with those "well while I'm here" because it snowballs fast! :rofl:
  24. bluex

    Headlamp Adjusters

    I just bought Dorman ones for my dually an they stripped out as soon as I tried to put tension on them with the spring. I might have to see if that will work on it. Wasted like $15 on the 4 of them, they didn't even snap into the core support very well either. :doh2: My other idea is to weld a...
  25. bluex

    Who has the best cowl hood for 85 silverado? (steel)

    AMD or Key Parts for sure. Never had an issue with either if those. Might even be the same hood from both, but the fit was always good, made well decent thickness etc....

Forum statistics

Threads
41,750
Posts
901,141
Members
33,285
Latest member
macdiesel86420
Top