Search results

  1. S

    leaf spring removal

    The overload spring is the one I would take out first big one at the bottom of the pack Steve
  2. S

    AC repair

    Jerry, Good info!! didn't know that Steve
  3. S

    TH350 question

    I would get the car trany and put the good parts in the 4X4 case. Its not that hard, There are books/vidos on the rebuilding process. I believe the book tells you how and where to drill the plate for firmer shifts, and what balls to leave out. Its not rocket science Steve
  4. S

    best rear for towing

    Open would be the best and cheapest for towing. If you werent 10 hrs away I have 2 14 bolts and a dana 60 in my parts collection I'm selling Big Bearing flattop Knucle dana 44 front diff ect... Steve
  5. S

    Help me identify this stuff (pics)

    Very Kool truck, Gotta love gramps
  6. S

    best rear for towing

    My vote is for the Dana 60 its lighter than the 14 bolt, but some will say the 14 bolt FF is better cause of the bigger bearings on the pinion and its FF When towing there are so many variables, like weight and how you load your trailer, gearing, and brakes/axles on the trailer. I have...
  7. S

    MSD, Mallory, Accel or Other ???

    I always buy MSD stuff (cept there coils they suck) Dist, spark boxes and wires. I have heard about other folks having problems with there spark boxes, but mine have always been good. 6AL The last spark box I bought was a Summit brand (made by MSD) for my 92 454 truck. Its been a good piece...
  8. S

    3 on the tree, stuck in reverse

    Andy, Did ya ever get the thing out of reverse? I had a problem with my old truck, had to remove all the linkage from the trany and then take it out of reverse. the column was bad, Took it apart and replaced some parts inside from a auto column and it was good to go! Call me if ya want...
  9. S

    Flywheel Replacement Advice?

    That goes without saying, remove the inspection cover
  10. S

    3 on the tree, stuck in reverse

    I had a 75 350 three on the tree :cocktail:
  11. S

    Flywheel Replacement Advice?

    Sounds like the bendix isnt kicking out all the way or the starter is loose, hence the grinding noise. replace the bendix or starter and hopely the flywheel is ok. I have replaced the flywheel before Like C4 said, cept I used 8" long bolts in the bellhousing and slid the hole mess back using a...
  12. S

    BBC aluminum intake

    Andy, Shipped the intake out today PM you the tracking numbers Steve
  13. S

    89Suburban's Wanted List

    Beam is a better choice. lol
  14. S

    B&M Quick Silver Ratchet Shifter

    I have one in my 92, 10.5" floor to the top of the Tee. I put a tee hangle on mine
  15. S

    headers

    $50 is a good deal for those, you dont live in a rust state. I would remove all the paint and sand them a little. Buy some Eastwood stainless exhaust paint (black or silver) and paint them. They will last longer and look good. my .02 Steve
  16. S

    Looking for a project

    73 3/4 ton axles ( big bearing dana 44 )and there is a 3/4 ton camper frame that was cut/welded that go's with the deal
  17. S

    SM 465 to GM NV4500

    Good to know I'm looking for one myself
  18. S

    2000 z71

    That should be an easy fix, get them to knock a few bucks off the price for the light being on. If you need I have GM Techline I can look that up for ya. Steve
  19. S

    Truck is leaning to one side ???

    Do that^^ and measure the distance between body/core support and the top of the frame on each side find your problem real fast Steve
  20. S

    Stock spring rate

    One of the reasons why I like leaf springs are that you can add or remove leaves to tailor to your needs. Steve
  21. S

    Swap out my 6.2 Diesel for a 454

    Should make a build thread with this. Lots of pics.
  22. S

    Looking for a project

    What andy said You dont want an old plow truck or anything from the rust states. The first truck here is already lifted and has southern sheet metal. Steve http://parkersburg.craigslist.org/cto/2998301384.html
  23. S

    Throttle body base 4.3-5.7

    Okie Dokie
  24. S

    Throttle body base 4.3-5.7

    $35 Shipped ran good when pulled, throttle shaft is good, dont need bushed up. 22.90 TB 11.35 shipping .75 for delivery comp Steve
  25. S

    Transfercase

    Parkersburg WV Area

Latest posts

Forum statistics

Threads
45,582
Posts
986,854
Members
38,672
Latest member
Knightewulf
Top