Search results

  1. R

    Gear selector 1988 square

    don't know if it can help you
  2. R

    good brand for powerfull windows motors

    my regulator of the left door is new as you can sight in the top and bottom right of the left square corner hole. my weather stripping was disintegrated, there is still an improvement with the new one, but i think is not quick enought mainly at the top end, i also put wd40 in the rail to see...
  3. R

    good brand for powerfull windows motors

    thanks, i'll see this later. actualy,i have the 2 windows "slowly" working,and that 's enough, when i 'll do the fall guy conversion, i'll remove the can and all the wiring and then fix every electrical problem at this time. i keep your troubleshooting charts in good place.
  4. R

    good brand for powerfull windows motors

    thanks, i repluged the wire as they should, and the fuse still dies when i action the switch, well thats for the passenger windows not a real problem the moment. i was wondering if a system for automic closing, i mean that the window goes to the top without staying with the finger on the...
  5. R

    good brand for powerfull windows motors

    after some research, i think there is a missing plug on my harness i should have something like that behind my switch (the one the bottom left)
  6. R

    good brand for powerfull windows motors

    today i replaced the weather stripping and window's channel on my truck, but unfortunatly it doesn't help the windows to works better. it goes up very slow and stop 10 cm before the top, the motor which looks new seems lazy. Do you know a good brand of powerfull windows motor that can push...
  7. R

    What have you done to your square lately??

    paint my new tanks, the front drive shaft and other stuff
  8. R

    What have you done to your square lately??

    I ve checked that the front drive shaft i ve ordererd is the good one,and YES it is !
  9. R

    somthing to know before removing the tail gate aluminium band ?

    thanks chengny, it'll help i was about to take measurement with a vidcap of a fall guy epiode zoomed to the real size. the pegs on my GMC are broken, i have ordered double sided 3M scotch. As i can feel some resistance from the chevy emblem, i'm prettry sure there are aslo pegs, i'll tell you...
  10. R

    somthing to know before removing the tail gate aluminium band ?

    Now i that i have the good gmc rear emblem, i need to remove the aluminium band to remove the chevrolet emblem. i have a bedliner on the door, once removed will i be able to access to the clips/screws ?? that maintain the band. i want to have it removed, because i'll try not to break the...
  11. R

    16 gallons tank to 20 gallons swap

    well, i'll see how does it look without, anyway if want to put back the shield, i'll have to re-work on it because it is the small 16 gal shield, perhaps i m thinking of a perforated sheet metal/aluminium.
  12. R

    front gm 10 bolt yoke on 1987 V10 strap or u-bolt ?

    thanks, i'll try with one bolt of my silverado 2500 they should be the same.
  13. R

    front gm 10 bolt yoke on 1987 V10 strap or u-bolt ?

    my truck was missing the front drive shaft when i bought it, now i have a new drive shaft but i don't know how to secure the u-joint on the front yoke. looking at the yoke, it looks like there is no thread inside and holes on both side, but in the rockauto catalog they only sell strap clamp...
  14. R

    sierra classic 1500 emblem and red capet

    2 sierra classic 1500 fender emblems These was originaly 2500 emblem that i cut to get the 2500 badge and i put back a 1500 badge on it. They don't have the struds and have to be install with double side tape The black part have been repainted. $35 shipping from France included Brand new...
  15. R

    Warn Classic Winch Bumper

    hey, that s what i need for my fall guy truck replica, can you take some hi-res pictures, and give me some measurement ? looks similar to this one :
  16. R

    Which Squarebody pickup do you like the best?

    i know i can adapt a np203, but in France it's rare and expensive, also need the adapter for the th700r4 and a different front drive shaft. I want to keep my tuck as light as possible (it is not work truck), my wish would be an ls1, a light awd trans, and aluminium drive shaft. My think is...
  17. R

    Which Squarebody pickup do you like the best?

    For the look and the confort i chose the 81-87 quad healights, but i miss the full time 4x4 from the previous version, but the np203 is too much heavy, my wish would be to find the conversion kit that make the np208 full time. i not certain tbi is better than a carb, i wanted this, now that i...
  18. R

    16 gallons tank to 20 gallons swap

    if it takes 25 years to rust and leak, i think i'll try to put the spalsh shield as i go with brand new tanks but if it's to hard to modify i won't waste time on it.
  19. R

    16 gallons tank to 20 gallons swap

    for the sending unit, i think a 180 ° degree turn, fix the problem as the tank are the same for both side, as i take the sending unit from my odl tank i just have to put it the same way it was. lookin at ebay i founf there are 2 different rear brackets ...
  20. R

    16 gallons tank to 20 gallons swap

    When i bought my v10, i came back home with the right side tank in the bed removed by the P/O because of leaks. i ordered 2 new thanks (+ strap) from rockauto, but i was thinking i had 20 gallons tanks so i took these ones, in fact it was 16 gals on the pick up. Now i have to install the...
  21. R

    some wires not connected

    i'll repair this later, as i am planing to swap the engine for a more modern one (probaly a LS1), i 'll have to adapt tha whole wiring harness to keep AC, cruise control and all the others features, but it is not for tomorow. my headligh connectors are hacked in the same way. one of the P/O was...
  22. R

    some wires not connected

    i think is "paralell" wiring of the hazzard switch, as i have a "hazzard switch button" added on the bezel. Perhaps one the precedent owners didn't find the switch on the steering column, and decided to add one, after what an other knowing that the switch is on the column on this kind of us...
  23. R

    some wires not connected

    there is a permanent 12 V at the plug but even with the wiring manual i did not find where it so be plugged so i decided to search under the dash... here, it's an electric nightmare
  24. R

    Need to replace heater,AC controls...help

    there is a retro fit system from vintage air http://www.vintageair.com/2012catalog/2012%20VintageAir%20Catalog%20Final%20WEB%20%28Page%2036%29.pdf
  25. R

    1985 chevy truck question

    are they the weight capacity ? 1/2 ton, 3/4 ton, 1 ton for example a V10 1987 comes with a th700r4, whereas a V30 comes with a TH400

Latest posts

Forum statistics

Threads
45,583
Posts
986,858
Members
38,672
Latest member
Knightewulf
Top