Search results

  1. J

    How do I get to the clutch pedal bushings?

    10 years and still going strong HotRodPC. I did this for my friend when we were 16, those pedals have had a rough life.
  2. J

    How do I get to the clutch pedal bushings?

    I agree with you 100% I'm not into "Jerry" rigging either. I basically just made my own parts when I didn't know the correct replacement parts existed. Also when your broke you do what you can, his pedals were so bad (worst I have ever seen) that I ground off maybe 1/16 to 1/8 of inch of that...
  3. J

    shackle flip?

    I'm thinking about doing the shackle flip on the rear and putting 52 inch springs in the front of my 85 crew cab to get a cheap lift that will still ride somewhat decent. This truck will be a daily driver also. Any suggestions?
  4. J

    How do I get to the clutch pedal bushings?

    I had "back yard" fixed a friends clutch pedals once the bracket was already pulled though. I ground down the center pins to match the housing on the pedal and then put steel washers on each side to take all the slack out, it took a few hours to do all of it. I also put some grease to help...
  5. J

    87 crew build

    The 4L80E NP208 swap will work good for you. If your worried about it not being strong enough, you could step your transfer case up to a 241C. You will save a lot of weight this way also. Quick question for you though do you still have the 205 transfer case from your 87?
  6. J

    shackle flip?

    Nevermind I found what I was missing sorry about that.
  7. J

    Write up: Gas Tank Relocation

    I figured I could use the same panel as a suburban does on the inside on it. Right now all I have is a 16 gallon tank. This truck is a 4x4 crew cab short bed with a 454 and a 400 turbo. 16 gallons isn't going to get me too far down the road lol.
  8. J

    shackle flip?

    I looked at the CK5 one and I cant tell that he lifted it any by the pictures. Am I missing something?
  9. J

    Write up: Gas Tank Relocation

    I was thinking about having the fuel door in the same place that a suburban is but on the drive side. I know I would have to modify the tank some. Has anyone tried that? Old77 could you give me the link to that website where the filler neck is behind the taillight please. Thank you
  10. J

    Write up: Gas Tank Relocation

    I know this is an old thread revival but could you use the 40 gallon tank to do this same mod and also how did the filler neck in the bed look after finishing? Thanks
  11. J

    Ccsb nv4500 np205

    I have a crew cab short bed truck currently with a 454 400 turbo and np203 full time. I'm looking to put in a NV4500 and a NP205 transfer case. How would it mate it and what all is involved in the swap? Any help is appreciated
View older results

Latest posts

Forum statistics

Threads
45,579
Posts
986,819
Members
38,671
Latest member
Mavric16
Top