Search results

  1. jake wells

    Ignition trouble

    yeah and you know if you keep replacing parts eventually it will run :roflbow: the parts were ok in price but the ignition coil was not cheap but i didn't want junk. duralast plug wires has left me stranded before including the ignition rotors which flat suck!
  2. jake wells

    Ignition trouble

    they are in the glovebox keeping them for spares.
  3. jake wells

    Ignition trouble

    well i replaced the module it still didn't start then i replaced the pick up coil it still didn't start then i replaced the ignition coil and then it fired right up and ran better than it has ever ran. i used ac delco brand ignition parts all the parts i replaced was stamped with GM 1-9-75
  4. jake wells

    Ignition trouble

    thanks Retro but what about the backfire should it worry me or no.
  5. jake wells

    Ignition trouble

    well my truck left me on the side of road it backfired and died no spark but the rotor is turning replaced the dist cap and rotor button because the old ones were crispy turned black and disintegrated. timing chain is fine it was replaced a month ago. so far i have changed these parts. new...
  6. jake wells

    61 apache torsion bars swap to a 85

    leave the torsion bar suspension they ride really good and even better if you use P metric tires on it
  7. jake wells

    What brand of stereo equipment do you like best?

    Glad i could help man, now just get some cheap speakers and mount them in the cab corner pockets and your set.
  8. jake wells

    Fuel questions! help please

    10-13 mpg maybe even 14 if your lucky.
  9. jake wells

    What brand of stereo equipment do you like best?

    I have this in my truck it has a input for a iPod or other stuff and it was easy to install no hacking required this radio sounds good too and seems like a good quality unit beats the pyle brand hands down...
  10. jake wells

    Original Carburetor Size for 454

    the original rochester would have a divorced choke this would be a direct replacement http://www.ebay.com/itm/JET-Rochester-Big-Block-Quadrajet-Carburetor-4-Bbl-750-CFM-Air-Valve-Secondaries-/390454016842?pt=Motors_Car_Truck_Parts_Accessories&hash=item5ae8df7b4a&vxp=mtr i had a holley on my...
  11. jake wells

    4.11??

    isn't there a build sheet tucked in the springs under the seat???
  12. jake wells

    need some part numbers flex fan to clutch fan

    i ain't driving to WV for a part
  13. jake wells

    need some part numbers flex fan to clutch fan

    HRPC my water is fixed and im drinking diet pepsi
  14. jake wells

    New.. Deployed and coming home soon

    what he said X3
  15. jake wells

    Hello Everyone.

    Oh noo we have lawn enforcement on the forum QUICK everybody RUN RUN RUN!!!! :roflbow: welcome to gmsb enjoy your stay and nice trucks
  16. jake wells

    Don't know why my brakes don't work.

    It's a farm truck why do you need brakes? just find the nearest tree :ehcapt:
  17. jake wells

    need some part numbers flex fan to clutch fan

    well curt i would have a elec fan but i would wire it completely different no relay only a toggle switch on the dash to turn it on/off my friend got stranded because of the relay temp switch wired to the fan.
  18. jake wells

    need some part numbers flex fan to clutch fan

    i think i will stick to my flex fan
  19. jake wells

    HAPPY 2nd BIRTHDAY GMSB !!!

    we need a members map
  20. jake wells

    need some part numbers flex fan to clutch fan

    rare part or what?
  21. jake wells

    truck sets lower on the passenger side front

    WTF is a spring rubber and my rubber stops are good front an rear i measured the rear axle to the rubber stops in the back and both sides are equal. i put the truck on level ground and measured the lower control arms to the ground and it is equal i even measured the frame to the ground on both...
  22. jake wells

    Is my truck tired???

    Give it a tune up and rebuild your carburetor. worn parts like a distributor or dirty carb can cause one to be sluggish
  23. jake wells

    Heater core replacement?

    i got a 12 volt 5 amp aux heater in my truck mounted under the seat. it is in the middle. it comes in handy in the winter when i need a little extra heat i replaced the heater core in my truck it is a non a/c model and it only took me about 2 1/2 hrs and it wasn't that bad. in my vent box i...
  24. jake wells

    truck sets lower on the passenger side front

    already checked and a set of springs from o'reilly's is 119.00 just on back order for 2 weeks but i had them ordered along with a set of el cheapo LT shocks. i will either do it myself ( :025: ) or give my friend a carton of smokes and a 24 pack of natural light to do it for me.
  25. jake wells

    truck sets lower on the passenger side front

    FOUND THE PROBLEM!! well thanks to crazy4offroad i jacked it up and set it on jacks stands did some measuring and it is not my control arm bushing or coil springs. the bolt connecting to the top of the shock was lose and the shock is rusted out it must have some stiff coils on the front because...

Latest posts

Forum statistics

Threads
45,562
Posts
986,268
Members
38,645
Latest member
sallyjeank10
Top