Search results

  1. AZ Highlander

    Fuel Hose OK ?

    I'm thinking this could be a great solution for $20. Pre-bent hardline. https://www.inlinetube.com/products/ctc8143 I purchased a pre-bent hardlines from Inline Tube for my rear axle when I replaced the entire brake system on my truck and they were worth every penny.
  2. AZ Highlander

    Mudflaps-not the woman type.

  3. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Got you added too Rob.
  4. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Got you added Mike.
  5. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Here is the link again to access the map: https://www.google.com/maps/d/u/0/edit?mid=1fFpdOTJlnQJYAIx51h4SMExs7Zmw2aOW&ll=33.66770527187561%2C-102.94947032558306&z=5
  6. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Got you added.
  7. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Got you added.
  8. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Got you added.
  9. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    I believe you can. I tend to sign out of google products whenever possible since they are the worst when it comes to privacy, so I don't know if you can save it to your Saved Places or whatever within Google Maps because you have to be signed in to use those. I just save it as a bookmark in my...
  10. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Here is a link that should work: https://www.google.com/maps/d/u/0/edit?mid=1fFpdOTJlnQJYAIx51h4SMExs7Zmw2aOW&ll=35.61371857409346%2C-102.94947032558306&z=5 Will get @wildgoose and @Chuckd84 and @brooksman9 up very soon
  11. AZ Highlander

    Venture a guess…

    exhaust cutouts?
  12. AZ Highlander

    Dino's Git Down 2023

    Wish I could make it, but family stuff came up so I am holding it down up here in Prescott. enjoy it!
  13. AZ Highlander

    Hey everybody I'm Anthony an auto tech from Tucson Arizona. I look forward to getting involved with this discussion forum.

    welcome from Prescott, Arizona! :welcome:
  14. AZ Highlander

    700R4 TV cable - weird adjuster?

    Great pictures Patrick. Thank you very much for sharing.
  15. AZ Highlander

    700R4 TV cable - weird adjuster?

    These should really help. Going to look at them in the am when I have time to head out to the truck. Thanks Patrick.
  16. AZ Highlander

    700R4 TV cable - weird adjuster?

    Thanks Patrick. Yes, edelbrock intake and their 1406 carb. My throttle cable comes at a weird angle too. Might need to fabricate something like you did to get the throttle cable and TV in a better position to one another. I wonder what the best bracket is for our trucks with Edelbrock...
  17. AZ Highlander

    700R4 TV cable - weird adjuster?

    Should I just get a new TV cable adjuster? Mine does not have the ability to adjust automatically using the throttle cable. At least I don't think it does. Is anyone familiar with this style of adjuster? I'm not even sure how to adjust it properly if its possible. Below are the instructions I...
  18. AZ Highlander

    700R4 TV cable - weird adjuster?

    I have a 700 R4 and what appears to be an unconventional screw type adjustment for the TV cable. I read the instructions that are linked through summit racing‘s website here, but can’t figure out what the best way to adjust my TV cable would be. I have 4.10 gears turned by a 350 through the...
  19. AZ Highlander

    Let's see those 4x4 Squares On Dirt!

    Finally got the 87 out on some dirt outside Prescott, AZ with my son and our ranch dog.
  20. AZ Highlander

    @NickTransmissions

    Hey Patrick, I have been following along since the beginning of the thread because I have the same trans and not confident it was setup correctly with the carb. I haven't driven it much yet. I am confused about the quoted post above. Wasn't your trans shifting into second at 15-20mph a week ago...
  21. AZ Highlander

    Dana 44 dust shield on backing plates

    It might work that way, but not work the other way around? I tried 10 bolt calipers on D44 with no success
  22. AZ Highlander

    Dana 44 dust shield on backing plates

    The calipers I purchased for the 10 bolt didn't fit on the rotors/backing plate of the D44. Barely different, but would not sit down on the rotor enough to put the caliper pins/bolts through the holes completely. The calipers for the D44 fit perfectly first try however.
  23. AZ Highlander

    Dana 44 dust shield on backing plates

    I found out the hard way that the brake calipers are not the same. Not sure what else.
  24. AZ Highlander

    Squarebody Down! HELP - Member Roadside Assistance Volunteer Map

    Got you added. Access the map here: https://www.google.com/maps/d/u/0/e...&ll=37.60570580479403,-102.94947032558306&z=5
  25. AZ Highlander

    Bad Master Cylinder?

    These are brand new wheel cylinders by the way. What did I do wrong? It seemed like just a little brake fluid was coming out slowly from the bleeder when I cracked it. Then it started making a leaking noise and I saw it flowing down the bottom of the tire on the back of the wheel. Why would the...

Latest posts

Forum statistics

Threads
45,562
Posts
986,308
Members
38,648
Latest member
Stickman
Top