Search results

  1. GreaseDog

    91 4L80E 4X4 trans, Western NC

    Wiring harness should plug right in IIRC. Still have the transfer case from the truck?
  2. GreaseDog

    LT1 oil filter adapter

    Should be able to use the stock oil filter adapter for that truck.
  3. GreaseDog

    power steering brackets and np205 console

    The reason it's loosening is you're missing the support bracket that goes from the exhaust manifold to the bracket. You'll need to trim it to fit with your headers, and space it out properly, but that should take care of your issue.
  4. GreaseDog

    Dodge Dana 60 up front

    Unit bearings, ball joints, and CAD make it a non worthwhile swap.
  5. GreaseDog

    Dodge Dana 60 up front

    What? The Dodge Dana 60 will bolt right in.
  6. GreaseDog

    Whats Gears Should i Run

    How serious is your 383, and what kind of teacher made this recommendation? Your 10 bolt may survive, but I would throw the stock carrier in the scrap pile first thing. Upgrade the carrier, a pair of axle shafts, and a cover with a built in carrier bearing girdle. Couple that with QUALITY...
  7. GreaseDog

    Modern full floating swap

    Another thing you might consider is the driveline parking brake found on the rear of a TH475. If you're running a TH400, that would enable you to put standard calipers on the back. I'm going to be running standard K20 calipers with a High Angle Driveline parking brake on the back of my NP241
  8. GreaseDog

    Please help.. 4 link

    What does it have for rear springs?
  9. GreaseDog

    Shackle Flip Lift ???

    DIY4X flip and switch is a better product, IMO. Easier to tinge shackle length and angle.
  10. GreaseDog

    SOLD $500 6.2 Burb in Woodstock, VA Buy it, or it's being scrapped.

    Preaching to the choir man. I've got 5 trucks in various stages of disassembly our disrepair. Even my once daily driven K1500 is down for the count. My kids come first, and I work a ton. Leaves not much time for "me" stuff, and it gets to you. Not having the money for the "me" stuff its the...
  11. GreaseDog

    new truck new problem

    Do some research.... Dig into it and find out what's wrong with it for yourself. It's always best to assume that the previous owner is a total moron. Could be just the oil drain holes I'm the heads gunked up, causing oil to back up in the valve cover, then getting into the cylinder from a...
  12. GreaseDog

    Talk me into or out of TBI

    I was getting 20 out of my 92 C1500 with a 5.7 tbi too. Have thought about putting another one like it together. I miss that little truck.
  13. GreaseDog

    Any of you fine folks...

    I ran an old Western conventional mount on my 77 and my 80. Recently have been rethinking my plans to put a 93 cab on my 80 chassis, which would put the old plow right back onto the chassis. Found my mount parts through Ebay, craigslist, and a local trader paper when I needed them. The...
  14. GreaseDog

    Quick question on ball joint replacement

    I don't remember right off the top of my head, but make sure you get the special socket for the ball joint taper inside the inner c. If you don't back it out before you torque the lower ball joint, you'll never get either of the joints torqued properly. Back the taper out, torque the lower...
  15. GreaseDog

    Jet stage 2 quadrajet

    SMI will build a carb to your specs... So jet sizes are not a constant.
  16. GreaseDog

    mud truck wiring harness

    Lol I used that website in 99 when I prepped my first derby car.
  17. GreaseDog

    mud truck wiring harness

    So this isn't a comp mud truck... Just use the stock wiring.
  18. GreaseDog

    mud truck wiring harness

    Lights and radio? I thought you said this was a mud truck? You're adding a lot of different things there, and one problem I see you're going to run into, with the alternator, it will backfeed, and the truck will not turn off when you flip the ignition switch. What circuits ate you wanting to...
  19. GreaseDog

    Headers...plug n play???

    Someone screwed up and sent you mid length headers. :lol:
  20. GreaseDog

    Jet stage 2 quadrajet

    Sean Murphy = formerly of JET Performance...
  21. GreaseDog

    mud truck wiring harness

    Positive with a toggle switch for the ignition, psh button for the starter. Then wire your gauges per the instructions for the gauges.
  22. GreaseDog

    new work truck

    And I haven't touched it in 6 months...
  23. GreaseDog

    Diesel swap ideas

    Actually looked into a Powerstroke 7.3 swap into my 90 K3500 (I have a 5 speed from a 7.3 truck, and a transfer case sitting in the shop). Same with the Duramax, it's a very complicated swap electrically. Keep it simple, and use a mechanical diesel engine. Have also looked into using a...
  24. GreaseDog

    mud truck exhaust

    http://www.decheaders.com
  25. GreaseDog

    Tow Trucks, Wreckers and Car Hauler Discussion

    You guys are making me miss my old job... :(

Latest posts

Forum statistics

Threads
45,567
Posts
986,404
Members
38,655
Latest member
bad face
Top