Search results

  1. randomTruckKid

    Want to bag 79. But also want to keep it around stock.

    Oh I completely forgot about stuff getting into the bags and puting holes in them. Even if I didn't take ot on dirt they wouldn't be smart. Small town loose roads. I guess I will lift it a bit. We kind-of wanted to put power steps on the truck. We have ways thought thoes were cool and would...
  2. randomTruckKid

    Want to bag 79. But also want to keep it around stock.

    what are your tires in the first picture?
  3. randomTruckKid

    Want to bag 79. But also want to keep it around stock.

    how hard would it be to raise it (just normally not with bags) compared to use bags to lower. i dont really want to static lower it. ive got some rough roads in town. it will see some dirt too. mainly why i asked if you cool have airbags at stock height and lower it for smoother roads and...
  4. randomTruckKid

    Want to bag 79. But also want to keep it around stock.

    Maybe half the ride height? We alrety have to replace/redo the front suspension.
  5. randomTruckKid

    Want to bag 79. But also want to keep it around stock.

    Kk. Might be more work than it's worth. I thought maybe it would be cool to be able to drop it for cruzeing and whatnot and raise it to normal when I'm just driving.
  6. randomTruckKid

    Want to bag 79. But also want to keep it around stock.

    I am looking at puting bags in my 79 c10 stepside. The only thing is when it's not lowered I want it at or around stock height since it's still going to be a daily truck. If that's possable how much would it be? How complicated would that be. I'm very new to this and still learning so I dont...
  7. randomTruckKid

    700r4 speedo port not spinning at all.

    i dont seem o be able to find a model for one. assuming i got the rear end size correct.
  8. randomTruckKid

    700r4 speedo port not spinning at all.

    Could I 3d print my own gear? Probobly stupid but it's plastic?
  9. randomTruckKid

    700r4 speedo port not spinning at all.

    i cannot find a 29 tooth gear on amazon for the life of me. id like to buy on amazon if possible. i did find the seals i need. im going to just replace both the outer and inner. might as well not worry about it.
  10. randomTruckKid

    700r4 speedo port not spinning at all.

    What Oh I didn't see tye other post.
  11. randomTruckKid

    700r4 speedo port not spinning at all.

    I ain't the smartest with cars yet.
  12. randomTruckKid

    700r4 speedo port not spinning at all.

    To sell more of If it gets stuck so it don't screw up the rest?
  13. randomTruckKid

    700r4 speedo port not spinning at all.

    For what ever reason it's only giving me notifications for replies. I'll pick that stuff up this week when I get back. I'll swap it out 2 or 3 weeks from now? Whatever next next next weekend is when we pull the cab. There is a really odd exhaust on the thing that blocks alot of that area on...
  14. randomTruckKid

    700r4 speedo port not spinning at all.

    So it said I need 29.4.... drive teeth? I think I did something wrong. When we took it out it did spin. But I di think it was stripped.
  15. randomTruckKid

    700r4 speedo port not spinning at all.

    It didn't work when we bought it. We will check it out. But thank you. There's alot of goofy stuff going on with the truck. At least it runs really good.
  16. randomTruckKid

    700r4 speedo port not spinning at all.

    Ok. Is there some website somewhere where I can figure out what size gear I need? I belive that's how it works?? The previous owner has changes the tire sizes several times so I dont know if it's correct.
  17. randomTruckKid

    700r4 speedo port not spinning at all.

    Hey guys, Recently got me a 79 c10 stepside. It has a 700r4 on it with a 350. The speedo port does not spin on it. We replaced the cable since it was old, crusty and melted to the exhaust. When we replaced it a leak started from the port. How should I go about fixing it. I know almost...
  18. randomTruckKid

    Truck stopped idling after fuel ran out.

    Turns out another big issue we were having is the carb was not properly tuned and the other 2 barrels weren't opening. We have that fixed and it runs like a dream.
  19. randomTruckKid

    Truck stopped idling after fuel ran out.

    WE FIXED IT!!!! we replaced the fuel filters then we just rev up the truck then let off the gas rev it up go off gas. It blew the crap outta the idle circuit. It's also running better too. Thank you guys for the help!
  20. randomTruckKid

    New from rockport tx

    Im going to leave it. It's not rusty at all. Unlike the grill and left light cover. Grille is really rusted and left light cover is missing several bits.
  21. randomTruckKid

    New from rockport tx

    That's cool! It almost fits with what we're going for on the truck. I wouldn't be surprised now if the back bumper and some other stuff is diffrent. I belive it used to be a racing truck then the engine blew up so the last owner got a 350 from a junkyard and rebuilt it for his son.
  22. randomTruckKid

    New from rockport tx

    Wait. So that's not the original bumper? That's from a newer truck?
  23. randomTruckKid

    Truck stopped idling after fuel ran out.

    I doubt it. It idled just fine w/a little surging? I think that's what it's called. But we just need to turn up the idle fuel. I think it what people said. There's something in the idle thing. We're going to replace the fuel filters then blow/suck the crap out the carbm
  24. randomTruckKid

    New from rockport tx

    Possably. It's for a diffrent hobby. Here..
  25. randomTruckKid

    Truck stopped idling after fuel ran out.

    Is there any yt vids on the carb trick?

Latest posts

Forum statistics

Threads
45,562
Posts
986,308
Members
38,648
Latest member
Stickman
Top