Search results

  1. Edelbrock

    TH350 intermittent leak

    You seals are probably dried out and hard. When the temperature changes the seal cant form to the parts that way it used to and a leak happens. Once the parts cool down, the tiny gaps close and stop the leak. This is not the standard "stop leak". This is a specialty product. It does not swell...
  2. Edelbrock

    350 High Inconsistent Idle

    I would check for vacuum leaks with a smoke gun (you can make one very easily using a cigarette). Maybe the vacuum line to the trans? Also, I would toss another carb on there just as a test. Are you sure your fuel is good? No water in the tank or old fuel? Ya, check the timing for sure, and make...
  3. Edelbrock

    305 to 454 swap

    Just in general, you can call an auto parts store and ask them to cross reference the parts to the vehicles / engines to see if its the same part number.
  4. Edelbrock

    Bent fuel pump rod

    Wrong fuel pump? Wrong push rod?
  5. Edelbrock

    TH350 intermittent leak

    I have seen transmissions push fluid out of the filler tube. It might be worth cleaning the outside of the filer tube, and then rubber band a small amount of paper towel around it. Then check it the next time you have fluid on the ground.
  6. Edelbrock

    Tv cable

    There is a used one in Mount Vernon, WA on Marketplace. Listed 6 days ago. Description: Transmission 700r4 2WD It works well Price: $700.
  7. Edelbrock

    Tv cable

    eBay: US $2,250.00 Fully rebuilt, 1 year 12K warranty. Whats Skagit going to charge with parts and labor and sales tax and shop supplies and hazardous disposal fee and credit card fee?
  8. Edelbrock

    front wheel barings

    One way to be certain is to pull your old ones out and check the numbers printed on them. Then get them from Amazon with same day or next day delivery.
  9. Edelbrock

    Lost Two Gen 3 LS Engines in my 1986 C10 2WD

    Are these That's exactly what I was thinking. My guess is that the engines started having oil pressure issues, or lifter noise - so the motors went to the junk yard, and then this guy bought them.
  10. Edelbrock

    Need AC help!

    Power is supplied by the switch on the dash. This power goes through the hi and low pressure switches, either of which can disrupt the power supply to the compressor. The compressor is activated by supplying power to the electromagnet that is under the pulley. So why is your pump coming on by...
  11. Edelbrock

    Missing sway bar bolts. Anyone know what size they are?

    Very cool. Thanks man. Much appreciated.
  12. Edelbrock

    Missing sway bar bolts. Anyone know what size they are?

    Yep.
  13. Edelbrock

    Tv cable

    If your transmission is indeed shot, and you plan to swap it out rather than repair it, then I recommend finishing it off. You know, pour salt water down its gullet and then do burnouts on the rev limiter, or find out how fast you can go while slamming it into park without breaking the trans...
  14. Edelbrock

    Suburban tire thread (help needed)

    Have you considered tires that are a little more... exotic?
  15. Edelbrock

    I’m pretty pissed!!

    If they don't make it... You make it.
  16. Edelbrock

    What’s the best way to fix/clean up this wiring problem?

    I found the problem for ya! That red wire is excessive. It can removed. The red wire next to the yellow wire...
  17. Edelbrock

    Loose timing chain replacement

    The chain will always have "some" slack. How much is too much?
  18. Edelbrock

    C10 LS Swap Actual Cold Air Intake

    I used to like them, before I learned more about them through testing. They have their time and place. For example, racing in a relatively dust free environment would be fine - Like if you were racing street bikes on a paved track. But for a daily driver, or anything off road - no way. Terrible...
  19. Edelbrock

    Tv cable

    Do you mean the kickdown linkage? If so: I would disconnect the cable at the transmission and see if the transmission shifts into higher gears. If it won't shift out of fist with the cable disconnected, then the cable is not the problem.
  20. Edelbrock

    C10 LS Swap Actual Cold Air Intake

    From my experience, the K&N type air filters are some of the worst ever made. Although they do have some small performance gains, the tradeoff is not worth it at all. They allow very fine dust to get past the filter and into the engine. This if not good for the piston rings or valve seats. This...
  21. Edelbrock

    How to fix my Front Axle not alligning

    You could mark the leaf springs to see if the axle is wandering around. Might want to check the U-bolts to see if they are loose at all.
  22. Edelbrock

    Intake Manifold RTV Dry Times

    Hands down the absolute best gasket sealer ever invented. Seals better, dries faster, and lasts forever. I have used it to successfully patch slashed sidewalls on off road tires and it held up 100%. If you this product on a clean dry surface, it will NEVER leak. For valve cover gaskets, you...
  23. Edelbrock

    87 V10 Wiring

    Aside from not knowing where that wire goes, is there any reason to find out where it would go? If there are no symptoms of a problem, then I would have a beer and call it a day. Vehicles sometimes had extra wires on a harness because that model uses the same harness as a model that has more...
  24. Edelbrock

    What’s the best way to fix/clean up this wiring problem?

    Looks pretty clean to me. Are you sure that's not how it came from the factory? ha.. ha... ha... So what ya got here is a wiring job that was done by someone that doesn't know how to wire things properly, but is also really excited about wiring in new stuff. Lots of aftermarket stuff I would...
  25. Edelbrock

    Missing sway bar bolts. Anyone know what size they are?

    Tread specs? Standard I assume? Count?

Latest posts

Forum statistics

Threads
45,561
Posts
986,266
Members
38,645
Latest member
sallyjeank10
Top