Search results

  1. ali_c20

    Accelerator Cable Adjustment

    Post some pics. Is it the right cable? Was it on the truck when you got it? Are the brackets the right ones? Which carb? You can get a nice universal braided stainless steel one and make it work perfect. https://www.summitracing.com/parts/sum-200042
  2. ali_c20

    Missing control arm bumper?

    My guess is rotted away. The part that goes into the slot is not very thick, becomes brittle and brakes. Good bye bumper.
  3. ali_c20

    Carb Adapter

    Nope, bought the tuning kit with springs, needles and jets. First put in the springs matching the engine vacuum and from that jet and needles. I run the 500cfm version on my 350, throttle response is great, like a monkey on speed. Before you tune your carb make sure your ignition is set right...
  4. ali_c20

    Carb Adapter

    The AVS 2 is spread bore but advertised as square bore. The difference in bore is not as big as on the Quadrajets but I bolted mine directly to the sread bore manifold of my K5 with a 1/4" gasket. https://www.summitracing.com/parts/edl-1906
  5. ali_c20

    On my 4th starter

    Welcome. How many teeth has your new flex plate? The starter has to match the flex plate. Mounting holes on the block are the same, the starter has the holes on different positions to fit the flex plate. There are starters which can be used for 153 and 168 teeth flex plates. Get a gear...
  6. ali_c20

    Exhaust Question

    My K5 (350) setup is 2.25" and merge in a 3" pipe with a big muffler. Muffler is perforated tube with packing. Pulls good (as good as 260hp crate pulls :D) and has a nice deep not loud tone.
  7. ali_c20

    vent window interchange?

    Do you mean the whole vent window assembly? They fit 73 - 87. You my have to drill a hole for the second bolt. Great information bout vent windows: http://forum.73-87chevytrucks.com/smforum/index.php?topic=27075.0
  8. ali_c20

    Gas Gauge Off The Deep End

    Good videos for gas gauge troubleshooting:
  9. ali_c20

    New member, Australia

    Welcome from Austria. Great truck.
  10. ali_c20

    Wiper motor Assy 74 C10

    73 - 84: https://www.lmctruck.com/electrical/wiper-components/cc-1973-84-windshield-wiper-and-washer 85 - 91 https://www.lmctruck.com/electrical/wiper-components/cc-1985-87-windshield-wiper-and-washer
  11. ali_c20

    Brake Issue

    Delco gold was ~1/3 thinner. Same with Raybestos. Bosch and Centric half and I did not order any of the cheap brake shoes. The best I could find are Dynamic friction true arc and they have significant more friction material and are riveted.
  12. ali_c20

    Brake Issue

    Have the same problem on my 66 Impala. Friction material on brake shoes is only half as thick than a few years ago which contributes to this problem.
  13. ali_c20

    AFR GAUGE addition?

    I have this kit, it has everything needed for adding the afr gauge. https://www.summitracing.com/parts/avm-30-0300
  14. ali_c20

    New FL K5 here

    Welcome from Austria. Nice K5.
  15. ali_c20

    Factory Paddle/Dumbo Mirror Mounting Reference

    Welcome from Austria. I would mount them in the same position. It would irritate me knowing that the mirrors are not symmetrical on my truck :D
  16. ali_c20

    Exhaust collectors for manifolds

    I have the hookers on my C20...great quality and they fit like a glove. Nice casting, nice machining, all straight and they come with flanges and hardware.
  17. ali_c20

    Mystery hole on fenders

    IMO trim has to be on when it's single color. With two colors and some pin stripe lines it looks ok without. I prefer trim, it just looks cool and adds detail.
  18. ali_c20

    Front driveshaft - longer on a NP203 vs NP205 ? Same mount ?

    The ends were the same.
  19. ali_c20

    Front driveshaft - longer on a NP203 vs NP205 ? Same mount ?

    When I did the swap 203 to 205 on my K5 I had to have the front driveshaft shortened and the rear lengthened. I have a TH350 and GM corporate axles.
  20. ali_c20

    Exhaust collectors for manifolds

    I cut off the material below flange on the manifolds of my K5 to have a flat sealing surface. I used a fat flange with a flat gasket. Works great, no leaks.
  21. ali_c20

    Mystery hole on fenders

    Hm, the position would match with the side trim. Maybe the original trim was adhesive and retainers at the ends that were prone to get loose. The rear corners of the precut side trims have retainers...
  22. ali_c20

    New project owner

    Welcome from Austria. Great project.
  23. ali_c20

    Wiper motor Assy 74 C10

    The early style wiper motors are rare. You can use the 78 - 84 wiper motor with pump. You need the wiper motor arm and the matching wiper switch. The wiper linkage is the same 73 - 80. You can get the motor and switch for ~ 100USD from Rockauto. The wiper motor arm is hard to find, maybe someone...
  24. ali_c20

    Replacing Long bed

    Welcome from Austria. You should be able to find bed parts on junkyards if you have a lot of time for searching. Or get the AMD parts. They are pricey but you save time and money on prep work on the old parts.
  25. ali_c20

    Hello everybody!!!

    Buon giorno. Benvenuto dall'Austria.

Latest posts

Forum statistics

Threads
45,567
Posts
986,403
Members
38,655
Latest member
bad face
Top