Search results

  1. SquareRoot

    1984 K10 Steering Column question.

    Are you implying you have a manual tilt column?
  2. SquareRoot

    Air inlet on the core support?

    The air in front of the core support doesn't have a direct path to the opening. It just gets compressed and creates a high pressure zone that makes it easier for outside air to get to the air cleaner. Leaving it open is probably beneficial for under hood temps.
  3. SquareRoot

    Air inlet on the core support?

    Mine has the same provision on either side. There's a "plug" in the core support that you can just knock out and the plastic cage pops right in. I actually moved mine from the P/S to D/S to gain room around the battery.
  4. SquareRoot

    4x4 Headers, Flowtech 11500FLT

    I've heard it said that only people that have issues with things are the ones that post about it. You never hear of the ones that don't have troubles with things. Based on that, you may be right. :hmm:
  5. SquareRoot

    Header farts

    Easy. Toss em in the trash and install these. You will wonder how you lived without em.
  6. SquareRoot

    4x4 Headers, Flowtech 11500FLT

    Leave the header headaches behind. You'll be amazed.
  7. SquareRoot

    Front bumper opinion on position

    Thanks. That's a clean square. I really like the colors.
  8. SquareRoot

    Please help me solve this riddle

    Remove and replace. Let r rip.
  9. SquareRoot

    Front bumper opinion on position

    Forget the bumper. Let's see the rest of the truck. I'm digging on the color combo.
  10. SquareRoot

    Brakes

    You can thank me later. Having the correct parts is on you.
  11. SquareRoot

    Gear Reduction Starter Praise

    I have a newer permanant magnet, gear reduction one on mine. I can't say if it actually spins the engine over any faster but it sure sounds different. I actually don't like how it sounds. When I let off the key it takes a second or two or three for it to "spool down". It's disengaging from the...
  12. SquareRoot

    Gear Reduction Starter Praise

    Shouldn't gear reduction spin the engine slower, not faster?
  13. SquareRoot

    Dome light went cross-eyed.

    I added my rear dome light. Measure, cut, install. Super easy. The actual cutout (hole) is only about an inch and it's mostly square. It fits the protrusion on the lights bezel.
  14. SquareRoot

    Going sniper efi choke light

    Sniper eh.. :mexsmoke: You can always unplug the oil pressure switch and choke light. Save the energy for the other things that's gonna pop up.
  15. SquareRoot

    question about gmc vs chevy

    So the drivers side rode better but the passenger side worked harder? That might have been the worlds first "Hybrid". :laughing1:
  16. SquareRoot

    Dome light went cross-eyed.

    https://www.gmsquarebody.com/threads/installing-a-lighted-rearview-mirror.35396/#post-723286 Post 14
  17. SquareRoot

    Surprise truck for the husband

    :popcorn::pedobear: @AuroraGirl, you got company.
  18. SquareRoot

    Hydro Clutch Pedal Assembly...from an S10?

    I found the pics of the clutch rod modification. I cut off and drilled out that worn out post on the pedal. A 7/16' fine thread bolt was tack welded in its place. So the rod end now slips over that bolt and secured with a nylock not. Eliminates the pin wearing out in the future. Did the same...
  19. SquareRoot

    Hydro Clutch Pedal Assembly...from an S10?

    It's been a few years and several cell phones ago. I have a thread with pics on here somewhere. I'll do some searching and see what I find.
  20. SquareRoot

    Hydro Clutch Pedal Assembly...from an S10?

    Good start. Replace the plastic bushings in the cross pins. I can see the post on the pedal is highly worn. You should weld that up and file it down so it's somewhat back to normal. I went full on nuclear with mine. Machined new stainless steel larger diameter crosspins, heat treated and...
  21. SquareRoot

    Radiator Support

    :party36: You been quiet lately. How you be?
  22. SquareRoot

    Radiator Support

    Read your post and just went out and checked mine. It's supposed to have that bend in it. All good. I actually cut mine at one point and welded it back together. Discovered you can't do a cam change with the engine in the truck otherwise.
  23. SquareRoot

    Drive line

    Hopefully not by FedEx. They could destroy an anvil in shipping.
  24. SquareRoot

    Dome light went cross-eyed.

    Nice. Are you Amish by chance?
  25. SquareRoot

    Dome light went cross-eyed.

    Define "tad". If I sh*t my pants a "tad", that really doesn't tell the whole story.

Latest posts

Forum statistics

Threads
45,562
Posts
986,297
Members
38,646
Latest member
EDNOMAD
Top