Search results

  1. AZ Highlander

    What have you done to your square lately??

    I could use pics of the sender harness. This spring, I will be attempting to pull the longbed off, replace sender on drivers side 20gal stock tank, add secondary passenger side 20gal tank, and replace the axle with a FF axle I picked up last summer because my diff gears are all chewed up. Any...
  2. AZ Highlander

    Sliding Window Restoration Tips Please?

    Sam, did you ever rehab your rear sliding window? The directions @SirRobyn0 gave are what I plan to follow for mine, but it also appears that there is some rubber/old black silicone that has cracked and pieces fell away on the exterior of the non-moving glass. Maybe I can remove the crusty and...
  3. AZ Highlander

    Sliding rear window gasket?

    I need the seals for the sliding portions as well. My window to cab seal is fine for now.
  4. AZ Highlander

    What have you done to your square lately??

    Nope. Just cut them, placed heat shrink over the wires, soldered, and heated up the heat shrink over the solder joint.
  5. AZ Highlander

    Shelf it storage shelf

    Hows the shelf working out Rob? I'm planning to make one (sort of got started mocking it up already), but curious about yours after a few years.
  6. AZ Highlander

    Fuel Gauge Woes

    Thought I had my fuel gauge working because I made a connection between the gauge and tank wire and it went from 3 o’clock to 3/8 tank, but would only read 1/2 tank when filled. Heard that it's likely this little resistor that's gone bad on the back of the fuel gauge. Tested the resistance...
  7. AZ Highlander

    Hello from Las Cruces NM

    Well done Joe! Nice square you fixed up there. Welcome from your neighbor to the west here in Prescott, AZ. -Frank
  8. AZ Highlander

    Let's see those 4x4 Squares On Dirt!

    Heck yeah Jacob! I know the feeling. My K15 was a giant paperweight for the last month as I have been working on the fuel lines. Got er running like a top today though! I haven't been quite that far past Woods Canyon Lake, but my two teenage sons and I were camping in our hammocks out at the...
  9. AZ Highlander

    Wrong brake calipers?

    Oh yeah, I forgot that I had to very slightly drill out the hole in the brake hose for my slightly larger banjo bolt. "That was sketchy, but worked out really well." ^My new quote for my squarebody "solutions"
  10. AZ Highlander

    Let's see those 4x4 Squares On Dirt!

    Definitely counts!
  11. AZ Highlander

    Sad Discovery: GM 10 Bolt Fails

    Prescott, AZ
  12. AZ Highlander

    Sad Discovery: GM 10 Bolt Fails

  13. AZ Highlander

    Sad Discovery: GM 10 Bolt Fails

    Oh yeah, you better believe I took the cover off first before pulling any other bolts. It’s crazy good condition. So glad. We need to do some of this before I swap the axles, so it is going to be a bit still.
  14. AZ Highlander

    Sad Discovery: GM 10 Bolt Fails

    Picked up a 14bff in really good condition having 3.73 that matches my d44 front axle gearing for $200 today. Also got the passenger gas tank for $40. Let’s see if I can get this thing in shape for summer trips up in the Prescott National Forest.
  15. AZ Highlander

    Problematic Starting - rotate crank before starter engages?

    Thanks everyone. We also talked to a couple guys at the hot rod shop in town. They said to hit the flex plate with an hammer and see if it rings like a gong or not. If it doesn’t ring out, it’s broken and needs to be replaced. They also said to try a 88-98 starter instead, which I think is what...
  16. AZ Highlander

    Problematic Starting - rotate crank before starter engages?

    My 16 year old son is having a tough time getting the 78 K25’s 350 5.7L to crank and fire. He’s messed with every combo of starter shim, counted the teeth on the flex plate to ensure it is the correct starter, and all he can do is this process of turning the engine by hand, then trying to crank...
  17. AZ Highlander

    Let's see those 4x4 Squares On Dirt!

    Looks like Boer goats with a brand new 2024 model kid you got there in the first photo. You should post up a bit about em in the Farm and Ranch thread
  18. AZ Highlander

    Let's see those 4x4 Squares On Dirt!

    I know you've talked about your wheels previously @Grit dog , but I'm looking at options for 8 lug steelies. I'm not looking for as tall of wheels, probably just 15x8, but only found 16x6.5 in 8 lug so far.
  19. AZ Highlander

    Bad ignition switch?

    Would the ignition rack cause only 1v to get to the distributor wire? He just replaced the pinon because he broke the plastic during column disassembly. The pinon came with a new rack, but not sure if he replaced it or just reinstalled the original.
  20. AZ Highlander

    Bad ignition switch?

    O'Reily's had them
  21. AZ Highlander

    Bad ignition switch?

    Looks like it may have been a bad ignition wire solder. Stay tuned
  22. AZ Highlander

    Bad ignition switch?

    Thanks. All of those should be getting full battery voltage however, correct?
  23. AZ Highlander

    Bad ignition switch?

    …
  24. AZ Highlander

    Bad ignition switch?

    My sons K 20 has problems with ignition. They are only getting one volt to the distributor. The 16-year-old pulled the ignition switch and in the run position all were at zero ohms, which he thinks should be correct. He reconnected the ignition switch at the column and was getting full battery...
  25. AZ Highlander

    Sad Discovery: GM 10 Bolt Fails

    Decisions, decisions. Seems like there are two roads to take and I may be taking the less popular route, but thats nothing new for me. Trying to think about the truck long term instead of just keeping it going. First, I am putting the diff cover back on, refilling with gear oil, and am going to...

Latest posts

Forum statistics

Threads
48,667
Posts
1,074,198
Members
43,338
Latest member
hauto85
Top