Recent content by yepyep

  1. Y

    Help with a hirn

    So alittle update here got the blinkers working sort of right hand side works,left hand sets the hazards off UNLESS i turn head lights on then it does nothing.....what in the actual **** if anyone has any ideas or has seen this before plz gimmie your 2¢... Tore column down again can find...
  2. Y

    Help with a hirn

    So ya messed around today fixing lights put a new alternator in, was feeling pretty good about the horn, then i discovered my blinkers don't work now first thought was that large connector with the bladed pins that had some loose ones on steering column and that's part of the problem because if...
  3. Y

    Help with a hirn

    Fixed it it's a bad spring in the steering column not the one for the horn button there's a second one underneath the steering wheel in the selector switch thought I was going to have to change the whole switch out which is a pain but was able to pry the back of it open and put a new spring inside
  4. Y

    Help with a hirn

    Ya I've narrowed it down to the steering column just got a wheel puller this is pretty lame all for a horn too much damn work luckily I got a parts truck sitting in my driveway
  5. Y

    Help with a hirn

    Ok thought i found it but no, there was some loose pins in a connector going up to the steering column fixed those actually have continuity through like blinker right turn signal or whatever up to an allen wrench that i drove in the horn button from the relay. However no matter what I do I...
  6. Y

    Help with a hirn

    Hey all I'm standing out here in the freezing cold trying to figure out what my horns not working it's an 87 square body TBI 350 I powered the horn relay on the orange wire continuity from the green wire out through the fuse box to the horn but no continuity from the horn relay pin to the horn...
  7. Y

    New impact: air vs battery powered?

    I have a 18v and a 36v, the 18v doesn't have enough power and the 36 will snap grade 8s in half....you can turn it down but i dont. Anyways 36v is the way to go for tough stuff otherwise i use pneumatic
  8. Y

    Compatible seat belts?

    Here
  9. Y

    Compatible seat belts?

    Anybody know of some 3-point seat belts that will for sure latch correctly with the factory latches? I replaced the driver's side and I had to cut the bolt out with my plasma cutter I'd rather spend $100 and get one that's compatible with the other side attached is a picture of the lap belt...
  10. Y

    spark plugs.... Over thinking!

    after reading this thread Ive realized I dont know **** about spark plugs some serious plug science in here
  11. Y

    Body part questions doors cab corners bed sides. Please help

    im restoring a k20 with aftermarket panels.....hes right they ****** suck i cant even figure out why one of my new bedsides pulls away at the top making tailgate difficult to close at least it doesnt fall down i guess
  12. Y

    Need an honest opinion

    my old truck silverado exactly like this I like the dark blue and gray but consider the silver it pops big time I'm restoring a K20 right now hopefully someday It will look like this its more of a off white then a silver but thats what i call it anyways
  13. Y

    Drop Height Fiasco

    god your truck has me drooling ive got a K20 im restoring was thinking about doing red and white, my old c10 was dark blue and silver very nice also but damn nice square body and sorry not useful at all i know
  14. Y

    BFGoodrich or Cooper?

    i dunno if anyone has said this but Good year duratrek 10plys At best ******* tires in the world for mud and snow absolutely amazing I've run them on the last two trucks I've had One of my trucks is a complete piece of **** people would still walk up to me and say tires looked awesome because...
  15. Y

    Correct front quadshocks for my 1987 V20 with plow

    hey all you guys got any recommendations for new quad shocks for my truck? it will occasionally have a heavy fisher plow on it in the winter months but im totally restoring this truck so it wont be worked too hard.what do you guys recommend for a good ride that can still handle a heavy load? (...
See more

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,780
Members
42,792
Latest member
WyldTinker
Top