YakkoWarner's latest activity
-
YYakkoWarner replied to the thread New guy... LED issues.LEDs can be fickle beasts, especially on these older machines that were built around incandescent expectations. Slight current leaks or...
-
YYakkoWarner replied to the thread Sanden AC compressor for Suburban with front and rear air.Did you have to switch all your belt driven accessories to 8 groove belts to match, or were you able to find one with a 6 groove pulley?
-
YYakkoWarner replied to the thread Sanden AC compressor for Suburban with front and rear air.Icebox is definately what I want down here in Texas for sure - I know the mounting position of the factory compressor is frequently...
-
YYakkoWarner replied to the thread Time to fix my belt drive system..My 1989 Suburban with 454 was factory configured with a single serpentine, so getting the bracketry from a similar truck should let you...
-
YYakkoWarner replied to the thread Sanden AC compressor for Suburban with front and rear air.This is a topic I need to follow closely since I have effectively the same problem - 1989 with front and rear air, system pretty much...
-
YYakkoWarner replied to the thread Temperature hunting at stop lights.I don't know the 1987 belt configuration, but on my 1989 I had to have a reverse rotation clutch and fan. If the water pump is driven...
-
YYakkoWarner replied to the thread Temperature hunting at stop lights.I have the factory pusher fan on my Suburban (1989 3/4 ton with the 454). Clutches (like fans) are directional, are you sure you have...
-
YYakkoWarner replied to the thread What have you done to your square lately??.Had to pull the battery last night - wanted to run it up to the store and battery bad (showed 12.5V with everything off but just turning...
-
YYakkoWarner replied to the thread Correct Gear Oil+.In older British rear axles you have to be careful with GL4/GL5 as well for this same reason. The GL5 additive package is not kind to...
-
YYakkoWarner replied to the thread Well that sucks.You would never see the refrigerant as a liquid - its only liquid under the high pressures generated by the compressor and immedialy...
-
YYakkoWarner replied to the thread 1986 suburban rear ac dash switch.I'm at work right now so I can't look at mine (at home 40 miles away), but looking at the wiring diagram it appears that the 12V key-on...
-
YYakkoWarner replied to the thread Grounding question.I forgot about the resistor wires - don't think you can buy any that aren't anymore so never think about it...
-
YYakkoWarner replied to the thread 1987 GMC V1500 TBI crank but no start.Glad it was that simple - sometimes just having a little info to go on and suggestions from idiots like me who have already made all the...
-
YYakkoWarner replied to the thread Grounding question.from what I understand, point dwell is the measurement of how long the points stay closed between opening....increasing the gap can...
-
YYakkoWarner replied to the thread 1987 GMC V1500 TBI crank but no start.Will it run if you manually power the fuel pump to get fuel to the throttle body? The pump is controlled by a relay with an oil...
