Recent content by rpcraft

  1. rpcraft

    Quality replacement steering box

    Your money to spend. I spent about 45 bucks on the XJ shaft. ;)
  2. rpcraft

    Quality replacement steering box

    Here is a video about the shaft conversion - There are others. You just make sure its a Cherokee XJ shaft -
  3. rpcraft

    Quality replacement steering box

    Buy a Lares brand steering box brand new from any parts store, no rebuilds. They are quality OEM replacements and known for not having issues. It's a top tier brand.
  4. rpcraft

    Rough country 2 in lift leafs

    Now that I think about it some most kits have blocks that have the angle built into them but since you got leaves for the rear often times they have a small angle shim that is bolted to the leaf stack so you might check and see if you have one on the bottom of the rears. sounds like you did...
  5. rpcraft

    Rough country 2 in lift leafs

    Call them and ask or maybe check over the instructions if there are any?
  6. rpcraft

    Cutting coils

    Lowered coils are so cheap now I would just get one that is built to lower and at least that way you are not messing with the performance of it through the entire range of motion. I had a buddy that chopped coils on a mustang 2 in high school and I am pretty sure in this day and age it's the...
  7. rpcraft

    Do I rebuild my SBC or swap for an LS3?

    If you have an engine to start with that is in good shape, good compression, and a 350, I would just put a cam and good matching intake on it, like one of the performer rpm packages. My buddy did it on his 1981 K5. I did a mild RV cam on mine and the difference was night and day. His was a...
  8. rpcraft

    New Bench Seat Options?

    That looks like more of a custom job overall. If price is no object LMC and the other truck places sell one from TMI but they are like 1200+ last I seem to recall. You could find an upholstery guy in your area that would probably do a truly custom setup like what you pictured for half the...
  9. rpcraft

    Are pneumatic tools obselete?

    Several devices for me that still work best on air: 1. Air hammer/chisel (I am 99 % sure they don't even have a battery version yet and I don't count the SDS units because the are usually super sized) 2. DA sander, just because they are also kind of self-cleaning on the right unit 3. Air die...
  10. rpcraft

    Can’t decide on single or dual tanks

    To answer the question about gas mileage in a v6 vs v8, I once had a 2003 dodge ram, shortbed single cab with a v6. Driving from Dallas to Houston it would get at best 13 to 14 mpg, without fail. I test drove a hemi dodge that was a 2005 and quadcab, shortbed. It averaged 18 to 21. To my...
  11. rpcraft

    Pressure in fuel tank-goes "pop"

    Sometimes people need to dig up old threads because the original poster never posted what solved their issue.
  12. rpcraft

    New HD Ball joints.

    I've never really heard of new ball joints needing to be broken in to be honest but maybe that is just something with these supposedly HD balljoints? What brand and part # are they if you have that info? MIght pay to know more about the ball joint itself and if there is a more durable unit I...
  13. rpcraft

    Pressure in fuel tank-goes "pop"

    Well, you only had 6 months. Things shouldn't be rushed right?
  14. rpcraft

    wood dimentions

    Well, let me summarize better to establish my mindset. Currently there is some sheet of metal over what is there. Not sure how thick it is but it is at least 18 gauge so not exactly structural but not an issue while parked in the driveway undergoing the knife. I am sure I will probably throw...
  15. rpcraft

    wood dimentions

    I had never considered that. I thought the process permeated the wood all the way through. Now I've learned something. Cheaper wood and urethane does seem smarter in the grand scheme.
See more

Latest posts

Forum statistics

Threads
42,064
Posts
908,284
Members
33,542
Latest member
willyg
Top