Recent content by purplestaff

  1. P

    6.2 water pump pulley

    I drilled the center bigger, was about to drill the stud holes bigger because of the shoulder on the studs... them the guy I bought it from texted me and said he found the one off of it. 3 hour round drive later and I got it!
  2. P

    6.2 water pump pulley

    14045165 i do believe that is the correct part number, but it doesn't get me anywhere, can't find anything available
  3. P

    6.2 water pump pulley

    I only found one online, it was over 100 bucks, I'll do some more googling and see
  4. P

    6.2 water pump pulley

    I have a 6.2/700r4 combo I got very cheap to replace the 305/sm465 in my c20, problem I didn't realize when I got it, there's no water pump pulley. It's got the double belt for the power steering pump. I have a pulley off a small block that has 2 grooves that'll line up with the power steering...
  5. P

    Swapped to 4x4, now the truck dances all over the road

    Set the toe.. problem is fixed!
  6. P

    Swapped to 4x4, now the truck dances all over the road

    I will set the toe in tomorrow and get back ti you guys, thanks for the input
  7. P

    Swapped to 4x4, now the truck dances all over the road

    No cracks, I just had it all apart and made sure to look
  8. P

    Swapped to 4x4, now the truck dances all over the road

    Just went and looked, took a couple of pictures. Sorry if they aren't very good it's dark now. Seems like the arm is relatively straight. Maybe slightly angled down?
  9. P

    Swapped to 4x4, now the truck dances all over the road

    Not lifted, I just leveled the back to stock height 3/4 ton springs in the front. The steering is off a half ton though. Apparently I wasn't thinking, toe is 7/16 out, gonna get it under an 1/8 and see what changes, I'll check the steering arm though, maybe the half ton and 3/4 are different...
  10. P

    Swapped to 4x4, now the truck dances all over the road

    I recently 4x4 swapped my 1985 c20, I used a donor 4x4 half ton that had the back of the frame rusted out for the brackets. But now the truck dances all over the road, I measured from same spots on frame to the axle and it all seems even side to side. Nothing is loose in the front end. Anyone...
See more

Latest posts

Forum statistics

Threads
45,570
Posts
986,465
Members
38,659
Latest member
Dennis Blom
Top