peats's latest activity
-
PJust an example of a happy $4k Oregon truck to raise the spirits. I mean, it’s at a used car dealer so….gotta be a bit more than a “good...
-
PI wouldn't pay anything for it. Too much work, and it's not 4 wheel drive! :p
-
PI know everybody has a different budget but it would be well worth saving a few more pennies to start with a better truck. That's a $500...
-
P6.99 to best of 9.75 mpg on my 85 K30 with mild 410 Big block/4 speed. 4.10 gears. I keep trying to get to 10 MPG! The good thing is it...
-
Ppeats replied to the thread What’s the best way to fix/clean up this wiring problem?.Cleaning up that mess of wires is not going to solve your drain issue.
-
Ppeats reacted to Matt69olds's post in the thread What’s the best way to fix/clean up this wiring problem? with
Like.
Go to your nearest salvage yard, get a junction block from a newer truck. Run ONE large power cable from the battery to the junction... -
Ppeats reacted to Ricko1966's post in the thread 1991 Suburban 3/4 ton: TBI to Holley Sniper conversion - stupid, or worth it? with Like.
I would think in 10 more years,it will be easier to find real deal TBI parts.GM made and sold millions of them. When the Holley system...
-
Ppeats reacted to Bextreme04's post in the thread 1991 Suburban 3/4 ton: TBI to Holley Sniper conversion - stupid, or worth it? with Like.
What are you looking to get from this? None of this will be simple or a bolt on, and in the end you will still be left with a fairly...
-
Ppeats reacted to 77Dmax's post in the thread 1991 Suburban 3/4 ton: TBI to Holley Sniper conversion - stupid, or worth it? with Like.
Step backwards over a TBI. Thats all those systems are. A good tune on your existing setup would be worth more.
-
Ppeats replied to the thread Power loss with aggressive acceleration.I had a small block that slowly lost power once. It was a cam and timing chain issue
-
Ppeats replied to the thread Loose timing chain replacement.Crank gear does not need to be removed to install a timing chain but cam gear will have to be unbolted.
-
PHardest part will be reinstalling front cover. Will need to be modified for installation unless oil pan is removed. Corners of inner...
-
Ppeats replied to the thread How does this sort of thing happen????.Have you checked to see if the outer bolt tab has not broken from the block? It appears to be a problem for SBC, BBC, and 6.2 diesel.
-
PVery nice! It might be helpful to put a drain hole on the bottom of the box for water. You could even put one of those duckbill rubber...
-
PI'd have a local builder build it and install it,that way if there's a problem,it's their problem,not your problem. I would not pay...
