GTX63's latest activity
-
GTX63 replied to the thread Just advice please.Here is my opinion based on experience- He is willing to trade for a POS G6, so he is tired of the truck and wants it gone. That truck... -
GTX63 replied to the thread Southeastern Truck Nationals - Lebanon, TN July 12 & 13, 2024.
-
GTX63 replied to the thread Death wobble, or bad wheel balance?.Just so happens I was at a truck show last week and talking to a guy who had the same issue. He bought a truck with a worn out steering...
-
GTX63 replied to the thread SWAPPING 84 c10 body onto 84 k10 FRAME.One of our trucks waiting for restoration was originally an 80 K10 currently with an 80C10 cab. The previous owner did a good job. He...
-
GTX63 replied to the thread Power steering gear box.Correct 4wd and 2wd gearboxs differ, and the fitting for your power steering lines may vary.
-
GTX63 replied to the thread How would you make this truck less ugly??.I'll repeat what has already been posted. Get some fork blades under the rear bumper and even it out. Booger weld a cheap wheel arch...
-
GTX63 replied to the thread Help with 86 K5 Tailgate.Once you have the cover off you can check for binding, misalignment, lack of grease, etc, but you can also unhook the drive cable and...
-
GTX63 replied to the thread Small Block choices: A feller has too many.The 010 blocks are good starting points. You can always put on whatever sets of heads suit your purpose. I won't suggest any cam (other...
-
GTX63 replied to the thread Can I put a np203 in my 84’ K10 that originally had the 208?.Yes, a 203 will work. The last three 80s model squarebodies, an 83, and two 85s I have drug home had 203s in them, lol. I don't know...
-
GTX63 replied to the thread Bubba's Brake Bleeder: A Guide.That simple tip was passed on to me as a young rookie mechanic at a Cadillac dealership. When all the equipment is being used and you...
-
GTX63 replied to the thread Bubba's Brake Bleeder: A Guide.I use a plastic water bottle with a clear plastic tube and that is it. One end of the tube goes onto the bleeder and one end goes...
-
GTX63 replied to the thread 88 suburban 350 rebuild questions..Without any other infor in this thread, it would depend on what I wanted my Suburban to do. I am an old school guy; I rebuild them as...
-
GTX63 replied to the thread Steering Box Question.Any squarebody gearbox with interchange, except a 4x4 needs one from a 4x4 and a 2WD needs one from a 2wd. I changed out a gearbox not...
-
GTX63 replied to the thread Oil pressure gauge problem.
