EvilGenius
Full Access Member From Metro Detroit
- Joined
- Last seen
- Viewing thread F/S 20” Detroit Steel Wheels with Michelin tires
Latest activity Postings About
-
-
I would be remiss to not ask for pictures. IMHO (and I don’t necessarily agree with this) that many times curb appeal rules the day over... -
EvilGenius replied to the thread ‘83 K5 350/4wd: aftermarket oil psi switch/sender/choke heater wiring question w/pics and schematic.Hey no problem. For whatever reason I find the wiring on these trucks to be pretty straight forward. Glad I could help.
-
EvilGenius replied to the thread ‘83 K5 350/4wd: aftermarket oil psi switch/sender/choke heater wiring question w/pics and schematic.Here is a snip of the 1984 wiring diagram from the GM service manual. I can't say what changes there may be from 83 to 84. There seem to...
-
-
EvilGenius replied to the thread ‘83 K5 350/4wd: aftermarket oil psi switch/sender/choke heater wiring question w/pics and schematic.I think your understanding of that circuit is a little backwards. The reason the choke is wired with the oil pressure sensor is to...
-
Hey Rob, I actually work for AMD, hopefully I can shed some light. Throw some pictures up if you have that, pics always help. The "drop...
-
EvilGenius reacted to Keith Seymore's post in the thread C10 LS Swap Actual Cold Air Intake with
Like.
One more story: I mentioned earlier that water is the bane of any engine induction system engineer's existence. The problem with the... -
EvilGenius reacted to Keith Seymore's post in the thread C10 LS Swap Actual Cold Air Intake with Like.
We weren't out of the woods yet, however. The next hurdle was that the engine coolant overflow bottle was on the front of dash. That...
-
EvilGenius reacted to Keith Seymore's post in the thread C10 LS Swap Actual Cold Air Intake with Like.
There are some "architectural" things we did, too, that you might not notice. These were required to even give us a shot at getting in...
-
EvilGenius reacted to Keith Seymore's post in the thread C10 LS Swap Actual Cold Air Intake with Like.
I hope you don't mind if I share some stories, since I have a minute: The system was capacitized for the "big engines" of the day: the...
-
Finished up my LS swap (L76 aluminum block 6.0 with LS3 heads) and got it tuned. My tuner said the open element "cold air" intake I had...
-
EvilGenius replied to the thread 700R4 Information Thread.Thanks for the really fast responses! I'll have to pick up a new drum I guess.
-
You need at least .040 to be on the safe side so get it however you need to get it. Your existing drum is prob warped but even if it's...
-
EvilGenius replied to the thread 700R4 Information Thread.I was hoping to avoid buying a new drum as this one wasn't warped noticeably and wasn't the cursed first design. Also I already have a...
-
EvilGenius replied to the thread 700R4 Information Thread.Hey @NickTransmissions do you have a source for different sized belleville plates or backing plates on the reverse input drum? When I...
-
EvilGenius replied to the thread 1991 Burb 2500 4x4.Looks like a nice rig. I've got no real insight other than whoever ends up purchasing it is going to be one happy camper. Love the red...
-
-
Loading…
-
Loading…
