-
-
Edelbrock replied to the thread Rear Brakes Locking Up.https://www.amazon.com/s?k=proportioning+valve&crid=36QQ6JXHLZL81&sprefix=proport%2Caps%2C223&ref=nb_sb_ss_p13n-retrained-pltr-ranker_1_7 -
Edelbrock replied to the thread Brake Fluid Flush GMT800.I would try this: Have someone start the engine and stomp hard on the brakes repeatedly while you check each rubber brake hose for...
-
Edelbrock replied to the thread Gas spilling when filling up.You might be able to CAREFULLY slightly pressurize the fuel tank. The exhaust from a shop vac, air compressor, or something like that...
-
-
Edelbrock replied to the thread edelbrock fuel line leak. Anyone else?.They are about this size: https://www.amazon.com/dp/B08SHYWDFK/
-
Edelbrock replied to the thread Window crank handle replacement.My rig had problems with both windows. One side was super hard to roll up and down, and the other side would get jammed and was just all...
-
-
Edelbrock replied to the thread V2500 4in lift replacement? ORD?.Nice ride. I would go with a different style of army boots though.
-
-
Edelbrock replied to the thread Rear Brakes Locking Up.If the only thing that is old is the proportioning valve, why not replace it?
-
Edelbrock replied to the thread Busted rear shock mount.You are 100% correct about the cigarette thing. Gas just doesn't burn in a liquid state. As for the water thing, you are correct as...
-
Since forever. It’s the vapors that burn. I would do the suggestion above with welding it. Use a support washer like this...
-
Edelbrock replied to the thread Busted rear shock mount.Liquid gasoline does not burn. It's not flammable. It has to be vaporized and mixed with oxygen - then the vapors are highly flammable...
-
Edelbrock replied to the thread Replacing the TBI engine, suggested upgrades or changes?.Assuming the motor has some miles on it, I would focus on getting it tuned up as much as possible and leak-free before installing. Maybe...
-
Edelbrock replied to the thread Busted rear shock mount.You could drill holes on either side of the break and bolt a plate (with a hole in the center) to you existing shock mount. Or just weld...
-
Edelbrock replied to the thread 1988 V10 fuel lines.Exact same thing happened to me a while back. They munched the fuel lines right on top of the tank. The little bastards.....
-
Edelbrock replied to the thread 1988 V10 fuel lines.Bra! RATS be eat'n yo ****. When you get them fuel lines fixed, put a bunch of DECON packs up there on the gas tank. DEFCON 1 works too...
-
-
-
Loading…
-
Loading…
