Recent content by Dooley
-
-
Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering
From the net... -
Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering
My modified Sears. Diesel power. -
Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering
Tractor I bought new in 1981. -
-
Transfer case
The CUCV Blazer is a M1009. Pickup is the M1008.- Dooley
- Post #38
- Forum: Transmission & Transfer Case
-
Transfer case
I have had a couple CUCV M1008 that were 1986. Neither were equipped with a 205.- Dooley
- Post #37
- Forum: Transmission & Transfer Case
-
Oil Primer tool. Make your own, the easy way from your own scrap.
A pair I have used over the last 50 years. -
What is it?
My 1972 GMC 3/4 ton Suburban was factory equipped with a BB402 and factory tach.- Dooley
- Post #26
- Forum: Other Vehicles
-
-
Steel Wheels K20
I always liked the look of my 235/85-16's on my M1008.- Dooley
- Post #14
- Forum: Wheels and Tires
-
Need help with installing a 454 in a 1979 GMC Sierra 4x4 frame
Likely you will need this fuel pump for clearance on the BB. https://www.summitracing.com/parts/CRT-M4530- Dooley
- Post #9
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
-
NP 205, ATF or Gear Oil?
https://www.gmsquarebody.com/threads/t-case-and-differential-lubricant-recommendations-lubricant-recommendations.32755/#post-659481 Excellent info in this thread in previous thread.. GM had a us run 10W30/40 weight motor oil in the 205 in 1980 after earlier gear lube and before ATF. My 1988...- Dooley
- Post #7
- Forum: Differential & Driveline
-
292 to 427T industrial swap, in C30. Many questions on fitment.
Both trucks were 30 Series 4X4 with a T400 transmissions. The only tall deck I used a Dart because the stock one was a double thermostat version and was huge.It allowed me to use a standard water pump. Since I was changing it I decided to use the short shaft to take the extra room at the rear of...- Dooley
- Post #25
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
-
292 to 427T industrial swap, in C30. Many questions on fitment.
Never followed a "6" with a Big Block. Replaced small block and 6.2/6.5 also. You will need a hydroboost lower power steering bracket for the big block. The small block I replaced with a steel crank 454 out of a 2WD Suburban. I used the motor mounts from the Suburban. The Big Block T replacement...- Dooley
- Post #22
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
