Craig Nedrow's latest activity
-
Craig Nedrow replied to the thread Questions about... My rear end?.There is also the Yukon lunchbox locker, I love mine, 14 FF. -
-
Craig Nedrow reacted to legopnuematic's post in the thread Questions about... My rear end? with
Like.
The 1968 rear is a Dana 60, with a Powr-Lok. The Powr-Lok is generally regarded as a very good limited slip, as it uses two cross pins... -
Craig Nedrow reacted to legopnuematic's post in the thread Questions about... My rear end? with Like.
Are the pictures of the axles you have? The first one is a Dana, with a Powr-Lok. Not a 14 bolt.
-
Lots O' options. If only a small section is bad just cut, flare, use a union to join a new piece in, check inline tube, or summit, jegs...
-
Use steel line,like factory.
-
4.56 was the lowest ratio available for an 84 2500 series, even with a 30.5" tire that is about 3500rpm at 65mph. 4.10s with the same...
-
People drove these trucks everyday,cross country,just like they came from the factory,sure someone may have ordered it or installed some...
-
Figure out what ratio it is now and what your tire size is. That information would give us something to work off of.
-
Craig Nedrow reacted to DoubleDingo's post in the thread Twitchy steering with a big travel trailer (rear sway bar help?) with Like.
Ditch the passenger tires and get E rated tires that are meant to be used on 3/4 ton vehicles.
-
Craig Nedrow reacted to idahovette's post in the thread Twitchy steering with a big travel trailer (rear sway bar help?) with Like.
Could be tire squirm....Don't think those tires are stout enough for the load??
-
Craig Nedrow replied to the thread Differential swap / bought it, work and install now.my 86 is 4:10
-
Craig Nedrow reacted to Dejure's post in the thread Instrument cluster questions on new build with Like.
YEARS ago, I moved all my gauges into an overhead display. I ran the wires up the window post (had to drill two holes) and go from...
-
Craig Nedrow reacted to Matt69olds's post in the thread Instrument cluster questions on new build with Like.
There are different sending units based on gauge readings. Meaning a gauge that reads to 60psi, requires a 60psi sending unit. I ran...
-
Craig Nedrow reacted to Ricko1966's post in the thread Instrument cluster questions on new build with Like.
^^^^^^ senders have to match the year of the gauge cluster. And type of gauges. Meaning if you've got an oil pressure light you need an...
-
More specifically, that's with a 315/35/20. With my T56 having taller gearing, I'll be swapping to 4.10s or 4.30s soon
Latest posts
-
4l80e conversion in 1985 suburban. What parts do I need?- Latest: NickTransmissions
-
-
-
-