CalSgt's latest activity
-
CCalSgt replied to the thread Radiator Support Bushings: Is this correct?.LOL... I was kinda surprised to see Eastwood is one of the lower priced units. For being a professional body and paint guy for 50 years...
-
CCalSgt replied to the thread Radiator Support Bushings: Is this correct?.Dad inherited that from my grandpa's body shop after it burnt down... Grandpa called it "Monkey on a stick" and we always thought that...
-
CCalSgt reacted to TotalyHucked's post in the thread Radiator Support Bushings: Is this correct? with
Like.
Just as a side note to add another option, Tinworks Fab makes nice body/radiator mounts as well if you don't care that they don't look... -
CCalSgt replied to the thread Radiator Support Bushings: Is this correct?.I'm not convinced you "Need" new core support mounts for the frame, if that's what you want to do I'm not judging. Just bolt the core...
-
-
CI would have thought you would use something like roofing flashing, maybe in 2 layers with panel adhesive/ construction adhesive.
-
CCalSgt replied to the thread Factory Underside paint?.My 1980 was black on the bottom of the cab and bed... Original body paint was like a metallic charcoal grey with a blue stripe
-
-
CCalSgt replied to the thread Painting the cab and firewall quesion.When I did my cab I painted with doors on and adjusted I did jambs, firewall, dash, and behind the seat in one session. I taped the...
-
-
CCalSgt replied to the thread Tightening down front yoke nut stops NP205 from turning.Look at the witness marks on the yoke, you can see where the old seal lips used to ride, if the yoke is pushing into the seal farther...
-
C12 gauge slug
-
CCalSgt replied to the thread What new tools have you got lately?.One of my peers resigned the other day & I ended up with his AOD (on call) this week… No cold ones for me :confused:
-
CCalSgt replied to the thread What new tools have you got lately?.New Miller Digital Infinity welding hood! “Used” on eBay for a good deal but it had never been welded with And a little TIG practice today
-
-
CCalSgt reacted to Bextreme04's post in the thread Fuel tank replacement on 1987 LS swapped square body with Like.
I removed both saddle tanks, replaced all rubber hose and both sending units and re-installed them all in about 2 hours. In a gravel...
-
CCalSgt reacted to Burkee1483's post in the thread Early squares. Wanna go h4? Toyota has a killer deal with Like.
This setup is legit for 36 bucks lol Headlights (x2)come loaded with bulbs Comes with a full relay harness setup And a big bag of zip...
-
CCalSgt replied to the thread 4" lift for 1977 k10.How much lift is currently on it, I would assume it has at least 4" already to be on 35's? You say blocks, does it only have lift...
-
COhhhhhh idk if you mentioned the replacement bedside before. That's your problem. The inner mounting area for the tail light is too far...
