bluex's latest activity
-
Yesterday was such a nice day that I took a cruise out in the county, and stopped by Heavy Metal Custom Shop in town. The Edelbrock... -
Didn't do much yesterday, just installed the pushrods and rockers. I'd ordered these Melling chromoly pushrods a while back off RockAuto...
-
Then repeated the process on the other side. We've got an engine boys! Ate some dinner and then tackled installing the Circle D...
-
Ended up not working on this yesterday, I remembered I'd bought the alternator for the C10 at the Orielly's by my house, so I left work...
-
First bath and a quick coat of wax. Tightened up the last few bits and pieces to go back on, stuck the Chevrolet emblem to the rear door...
-
Prime… Paint… More prime… Paint… Got the old converter out while waiting for the paint to dry So then a guy shows up to...
-
I’m taking no chances lol Pretty darn happy with that alignment Set it out in the sun to warm up for painting while I ate lunch
-
Started with just an assembled bottom end from yesterday… Then added the windage tray and pickup tube with a fresh o-ring Took...
-
I sure hope I got it lined up properly. I do not wanna have to do this again anytime soon. I carefully coaxed the rear main plate over...
-
So yesterday I did what I planned, cleaned everything again and dropped the crank in. Torqued it, set the thrust, finished the torque...
-
The Iron Bull dump trailer came in. This thing is beef for a 15k trailer. The 7 gauge floor is one piece, which is pretty awesome...
-
Piddled some more after work today. Started with re-cleaning and re-oiling the cylinders Then started fitting rings. Thankfully, all...
