Andronikos's latest activity
-
AIt depends on the master Delco-Morraine vs Bendix vs whoever else they sourced them from, and the size of them The low drag brakes...
-
AAndronikos replied to the thread Rear Brakes Locking Up.Thanks Legopnumatic. I'ts aluminum with a plastic reservoir just like you describe.
-
ATaylor beat me to it- and now Derek- Master cylinders are not all the same, some have the large chamber in the front, some rear, some...
-
AIt could be either way. Some of the lighter weight trucks have the front brake reservoir and piston is in the back; heavier chassis...
-
AAndronikos replied to the thread Rear Brakes Locking Up.Thanks DoubleDingo. I made all new steel lines for the truck and routed them the same way as it was when I got it. It might have been...
-
AMaybe mine is wrong, but it is as it came from the factory as far as I know, and the small line is hooked up to the front port of the...
-
AAndronikos replied to the thread Rear Brakes Locking Up.Thanks Blue Ox. The diagram reminded me I bought the tool that temporarily replaces the warning switch for bleeding purposes. It screwed...
-
AFrom the manual: Doesn't provide a lot of answers, but at least you can see what all is in there.
-
AAndronikos replied to the thread Rear Brakes Locking Up.OK. So you're saying concentrate on the proportioning valve. I'll try that.
-
AAndronikos replied to the thread Rear Brakes Locking Up.OK. I'll try that. Thanks
-
AYes and no as I assume you and your helper did one wheel cylinder at a time. I am saying to open BOTH rear bleeders in an effort to...
-
AThat's right, rear of the master feeds the front brakes and front of the master feeds the rears. Check to make sure your proportioning...
-
AAndronikos replied to the thread Rear Brakes Locking Up.Yes, I have my doubts about new valves too. The way you mention about re-centering the valve is how I bled the rear brakes. Wouldn't...
-
AJust my .02 from personal experience, but I would not change the valve as your replacement is going to be Chinesium. If you do change...
-
AAndronikos replied to the thread Rear Brakes Locking Up.I have the rear port of the master, the small line, feeding the front brakes, and the front port of the master feeding the rear brakes...
