ali_c20's latest activity
-
I think what you're going to find once you try to install them is the lug nut holes are elongated from t the wheel coming loose and... -
ali_c20 replied to the thread Finally found some 5x5 Turbines!!!.Nice! Glass bead blasting/polishing gives alloy wheels a nice satin gloss.
-
New Old Guy here, the 78 Blazer getting another round of major repairs. Engineer ( mech, electronic, manufacturing, automotive) 40+...
-
I also learned not to let my disability hold me back and got to the blazer once I got my prosthetic leg getting used to wearing it. The...
-
Hello, I have a 1985 Chevy K5 blazer and a 1983 K20. The Blazer, bought in 2004 while I was in the Marines on leave. Did have a 305...
-
It is and I put in a 4L80E. Did fix the issues with the 12 valve Cummins before I put it in,one was take the timing cover off and fix...
-
The easiest way to remove the axle bearings. Remove both axles. Long homemade drift. 1/2" or 5/8" round stock. From the opposite side...
-
ali_c20 reacted to silverbackreef's post in the thread Good wire for repairs and/or rewiring circuits? with
Like.
I'll take everything I can get. Deep dive is OK, I'm a retiree with too much time on my hands. Thanks. -
ali_c20 reacted to SirRobyn0's post in the thread Differential swap / bought it, work and install now with Like.
Well i brought everything home with me to tear into the differential hopefully tomorrow. I don't have a covered area to work at until I...
-
You have to have the TV cable is about 99 percent accurate. You could go with a constant pressure valve body,more money,more trouble,not...
-
ali_c20 replied to the thread 305 to 454 swap.Welcome from Austria. You can go to an auto part store, look it up online on Rockauto or Summit or Jegs or use the search function in...
-
#3 did that.
-
ali_c20 replied to the thread Bent fuel pump rod.I rotate the engine till the rod is in as far as possible, put some grease on the pump rod so that it doesn't slip out, double check and...
