Recent content by 1983_SB_4X4

  1. 1983_SB_4X4

    quad front shocks?

    My '83 K10 has the quad shock setup also. Rides pretty good for a 29 year old truck.
  2. 1983_SB_4X4

    1982 700R4 help no OD

    Thanks John that's the plan IF I can scrape the $150 together. With the wife losing her job pennies are tight LOL
  3. 1983_SB_4X4

    1982 700R4 help no OD

    Found a good used '91 unit out of a 4x4 for $150. Hope I can get the money together by Friday. Who needs parts??? I got a few square parts!!!
  4. 1983_SB_4X4

    700R4 help

    Thanks Luke for the advice. Well you fellas have a good evening/mornin I got to try & get some sleep 5:15 is just around the corner. Damn truck has me so worked up I can't sleep.
  5. 1983_SB_4X4

    700R4 help

    Was just looking @ the TCI website & their "beast" is listed @ $80 something.... This will be just a little daily driver that will occasionally pull my boat & be used for some beach fishing trips hopefully. Nothing hardcore, just normal driving. My Reverse, 1st & 3rd work perfect. No slip, no...
  6. 1983_SB_4X4

    700R4 help

    Had to come back & say thanks for your help HotRod. Sorry I forgot in the last post my minds been pretty cluttered trying to figure this dang trans out. The sun shell you mentioned (i'm by far nor trans expert) is it hard or expensive to replace??? How hard would it be to take a good 2 wheel...
  7. 1983_SB_4X4

    700R4 help

    Yes sir I didn't mean it to sound like I thought putting thee Vette servo in was a fixall. I went with Vette servo hoping it was bad O-rings on the stock servo, but to no avail. I'm really on a tight budget with this little truck at the moment. My wife lost her job back in November, and I was...
  8. 1983_SB_4X4

    700R4 help

    OK so I swapped out the stock 2-4 servo in my tranny for a Vette 2-4 servo, hoping that was my problem. But to no avail I still have no 4th or lock up. 2nd gear is now working ONLY when I manually move the selector through the gears?? If I put the selector in D and drive the tranny seems to go...
  9. 1983_SB_4X4

    Cutting Sheet Metal

    Or one of these http://www.harborfreight.com/18-gauge-sheet-metal-shear-92148.html
  10. 1983_SB_4X4

    Cutting Sheet Metal

    Could always invest in one of these..... http://www.harborfreight.com/16-gauge-air-nibbler-96661.html
  11. 1983_SB_4X4

    Supercharger question/feedback

    Twin turbo setup would be the way to go.
  12. 1983_SB_4X4

    my 88 k1500, tons of pics

    Great job.
  13. 1983_SB_4X4

    Get better MPGs out of 454?????

    Gears & Trans type also will affect your mileage.
  14. 1983_SB_4X4

    1982 700R4 help no OD

    Jim the more I think about it, I think from what I've read there is a 2/4 servo in the tranny?? If that's the case I think that servo is not working. I put a tach on it yesterday and it seems like its shifting from 1st to 2nd briefly then sliding smoothly into 3rd. I manually ran it through the...
  15. 1983_SB_4X4

    1982 700R4 help no OD

    Jim, Thank you very much for the response. please see below in red, and thanks for the welcome...... Once again thank you very much for the reply. I hope I can get this thing fixed. I REALLY look forward to keeping this ole truck on the road, and driving it daily. Rite now the relationship...
See more

Latest posts

Forum statistics

Threads
42,225
Posts
911,750
Members
33,731
Latest member
redneckgames
Top