SBC cam swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

devonrommel

Junior Member
Joined
Mar 16, 2018
Posts
2
Reaction score
0
Location
CA
First Name
Devon
Truck Year
1983
Truck Model
GMC Suburban K2500
Engine Size
350
Hey guys, I have an 83 K2500 suburban. Stock LT9 350/Sm465/3.73s.

I asked comp cams what RV type cam they recommend for my engine. They suggested this:

Grind Number:XE256H

Engine Family:Chevrolet 262-400 c.i. 8 Cylinder (1958-1998)

RPM Operating Range:1,000-5,200

Cam Type:Hydraulic Flat Tappet

Lifter Style:Hydraulic Flat Tappet

Camshaft Series:Xtreme Energy

Camshaft Gear Attachment:3-Bolt

Usage:Street/Performance

Valve Springs Required:Yes

Camshaft Material:Cast Iron

California Proposition 65:WARNING: Cancer and Reproductive Harm P65Warnings.ca.gov

Advertised Intake Duration:256

Advertised Exhaust Duration:268

Intake Duration at .050 Inch Lift:212

Exhaust Duration at .050 Inch Lift:218

Intake Valve Lift:0.447

Exhaust Valve Lift:0.454

Lobe Separation:110

Assembly Lubricant Included:Yes

Intake Centerline:106

Lobe Lift Intake:0.299

Lobe Lift Exhaust:0.304

My question is, what kind of gains can I expect from this? I'm trying to get more towing power on the cheap.

Sent from my SM-G960W using Tapatalk
 

cstew47

Full Access Member
Joined
Feb 7, 2015
Posts
181
Reaction score
121
Location
colombia
First Name
craig
Truck Year
1978
Truck Model
K5
Engine Size
383
In my experience, I have never seen a cam swap alone make a big performance increase. The cam is part of the system consisting of the carb size, head flow, torque converter stall speed and gear ratio. I wouldn't get your expectations too high for just the cam swap, although, that spec seems right for your truck.
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,236
Reaction score
2,156
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
That 212/218 duration should work, although most references I've seen had a max of about 214 @ .050 duration with stock heads. If you use stock heads and a decent carburetor and intake manifold you should get a noticeable increase in power, but with this duration you are at about the best you can get with stock smog-era heads.

If you also swap to better flowing heads it will really help a lot. If you use aftermarket 64cc aluminum heads and thin head gaskets you can get the compression up about 1-1.2 points, and the aluminum heads will tolerate more ignition advance without pinging. Better flow, higher compression and more timing - it all adds up to quite a bit more power.
 

Forum statistics

Threads
43,936
Posts
946,048
Members
35,982
Latest member
jake26104
Top