74 Shortbed
Full Access Member
- Joined
- Aug 12, 2013
- Posts
- 6,306
- Reaction score
- 1,412
- Location
- *
- First Name
- *
- Truck Year
- *
- Truck Model
- *
- Engine Size
- *
No truer words spoken there, lol..
Rattle in oil pan below 700rpms
- Thread starter usar17
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
87scotty
Full Access Member
- Joined
- Oct 8, 2015
- Posts
- 1,074
- Reaction score
- 282
- Location
- Central il
- First Name
- Andrew
- Truck Year
- 1987
- Truck Model
- V20
- Engine Size
- 5.7 for now
good read glad you got it fixed
Wildjoe330
Full Access Member
- Joined
- Nov 13, 2015
- Posts
- 66
- Reaction score
- 10
- Location
- Right Now
- First Name
- wildjoe330
- Truck Year
- Itbp
- Truck Model
- C20
- Engine Size
- 350
2-3 weeks ago mine sounded like it spun a bearing, Turns out
the top of the power steering bracket was broken off at the
top bolt close to the bolt and someone tried to weld it back
(Still Broken) vibration sounded like a spun bearing.
Temporarily tightened all, bolts were dirty froze loose (vibration).
Noise went away ha, sounded so much better.
Just ordered a new ebay PS Bracket.
the top of the power steering bracket was broken off at the
top bolt close to the bolt and someone tried to weld it back
(Still Broken) vibration sounded like a spun bearing.
Temporarily tightened all, bolts were dirty froze loose (vibration).
Noise went away ha, sounded so much better.
Just ordered a new ebay PS Bracket.
Camatruder
Full Access Member
- Joined
- May 11, 2016
- Posts
- 291
- Reaction score
- 1,050
- Location
- Belgium
- First Name
- Rik
- Truck Year
- 1991
- Truck Model
- K5 Blazer
- Engine Size
- 350ci / 5.7l
@usar17 : i'm having the same issue, heavy vibration when locked up and trying to accelearte slowly (so the TCC keeps locked up). If the TCC unlocks the vibration stops. Is there a way to check ignition being good under load ?
