Inner rocker panal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

marks86

Full Access Member
Joined
Feb 2, 2011
Posts
1,513
Reaction score
88
Location
Latham, NY
First Name
Mark
Truck Year
1986
Truck Model
K30
Engine Size
12v Cummins
So i replaced my rocker but never even hurd of an inner rocker until recently so I purchased one and I am kind of confused on where it goes
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,273
Reaction score
8,760
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
It goes on the inner part of the outer rocker....Does that make sense? You should have seen it when you replaced your outer rocker. If you didn't it may have already rusted off.

Crawl under your cab and on the inner side of your outside rocker should be a fairly straight piece of metal. That's your inner rocker. When I replaced mine I welded my inner rocker to my outer rocker and sealed it all off so junk could not get up into my outer rocker and rust it out again....
 

marks86

Full Access Member
Joined
Feb 2, 2011
Posts
1,513
Reaction score
88
Location
Latham, NY
First Name
Mark
Truck Year
1986
Truck Model
K30
Engine Size
12v Cummins
It goes on the inner part of the outer rocker....Does that make sense? You should have seen it when you replaced your outer rocker. If you didn't it may have already rusted off.

Crawl under your cab and on the inner side of your outside rocker should be a fairly straight piece of metal. That's your inner rocker. When I replaced mine I welded my inner rocker to my outer rocker and sealed it all off so junk could not get up into my outer rocker and rust it out again....

Im pretty sure It must be all rusted because I didnt see it when I looked
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,273
Reaction score
8,760
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
Im pretty sure It must be all rusted because I didnt see it when I looked

If I remember I'll have to take some pics of mine later tonight and post them up here and then you'll know for sure. If you don't have any right now it should make the replacement job very easy :waytogo:
 

marks86

Full Access Member
Joined
Feb 2, 2011
Posts
1,513
Reaction score
88
Location
Latham, NY
First Name
Mark
Truck Year
1986
Truck Model
K30
Engine Size
12v Cummins
haha ya I hope so, also there is prob two inchs from the bottom of the seat hump and the begginning of the rocker, and thats all rusted out, what would that be called or is that not even a part
 

Old77

Administrator
Staff member
Admin
Joined
Aug 19, 2010
Posts
28,273
Reaction score
8,760
Location
Kansas City, Mo
First Name
Jacob
Truck Year
1977/1990/1991
Truck Model
C10 longbed/R1500 Burb/R3500 Dually
Engine Size
350/350/454
Not sure....do you have a pic of the area so that I could actually see it?
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,566
Reaction score
5,925
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Yah, the inner rocker goes from teh bottom of the floor to the bottom of the outer rocker, should be a flat sheet of metal. MOst of them rust out around my way. I have about 50% of mine left so I am just going to plate right over it.
 

marks86

Full Access Member
Joined
Feb 2, 2011
Posts
1,513
Reaction score
88
Location
Latham, NY
First Name
Mark
Truck Year
1986
Truck Model
K30
Engine Size
12v Cummins
I dont my camara just broke up, but Im going to the girls house later, I will take some pictures then
 

Forum statistics

Threads
42,322
Posts
913,620
Members
33,819
Latest member
guillermoariast
Top