Wwiifan
Junior Member
- Joined
- Dec 12, 2016
- Posts
- 20
- Reaction score
- 0
- Location
- Lincoln, NE
- First Name
- John
- Truck Year
- 83
- Truck Model
- K10
- Engine Size
- 5.0
working on my 83 k10. History is I bought the truck and all oem wires were gone. Had a painless harness installed. Only enough wires were connected to make the engine run. I wired up the rest for everything I needed. Now I’m trying to tackle the hazard lights.
At the multifunction switch I see 8 wires. 4 of them go to the lights at each corner of the truck. All brake, turn, tail, headlight and marker lights work at all 4 corners. So I know those r good. One goes to the horn relay. Horn works so that circuit is good. One goes to the brake switch. Brake light works so that one is good.
I saw on rock auto a hazard relay. Where is this on your trucks and how is it wired?
At the multifunction switch I see 8 wires. 4 of them go to the lights at each corner of the truck. All brake, turn, tail, headlight and marker lights work at all 4 corners. So I know those r good. One goes to the horn relay. Horn works so that circuit is good. One goes to the brake switch. Brake light works so that one is good.
I saw on rock auto a hazard relay. Where is this on your trucks and how is it wired?