Duel Tank 1987 fuel lines

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

y2kvette14

Junior Member
Joined
Jun 19, 2019
Posts
2
Reaction score
0
Location
Tampa, FL
First Name
Steve
Truck Year
1987
Truck Model
V10
Engine Size
5.3L
The fuel lines on this V10 are steel with rubber ends at the fuel tank selector. No parts place lists them. They have a crimp (like on A/C lines) to connect the rubber to the steel line. I'd like to buy new ones since the rubber is very bad condition. I plan to try the hydraulic hose place and take rubber fuel lines along, but am not sure that they can handle the 5/16 and 3/8 lines.
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,729
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
You must be registered for see images attach
 

y2kvette14

Junior Member
Joined
Jun 19, 2019
Posts
2
Reaction score
0
Location
Tampa, FL
First Name
Steve
Truck Year
1987
Truck Model
V10
Engine Size
5.3L
Ok Amazon Hose inTampa was able to replace the rubber hose ends. All is well on these. Now we need the gas tank plastic stone shield for the drivers side saddle tank. Any one know where to find the factory part?
 

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,086
Reaction score
1,010
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
Now we need the gas tank plastic stone shield for the drivers side saddle tank.

A lot of GMSB owners would say "No, you don't."

The conventional wisdom is that those stone shields protect your gas tank from flying stones. But seriously, have you ever heard of anyone's gas tank being punctured by a flying stone?

On the other hand, what does happen with the shield installed (and it has happened to me) is that small stones get thrown up and wedged in between the plastic and the steel tank and settle in there. Once in place, due to normal vibration, the little stone begins to work against the two surfaces. The plastic is flexible enough to bend out of the way. But the steel is rigid and the stone(s) starts to wear against it.

It doesn't always happen, but after a couple of years, its not uncommon for a sharp stone to abrade it's way right through the tank wall.
 
Last edited:

Latest posts

Forum statistics

Threads
42,342
Posts
914,018
Members
33,844
Latest member
aaron06
Top