RustyBuckets
Full Access Member
- Joined
- Mar 23, 2013
- Posts
- 105
- Reaction score
- 5
- Location
- Kansas City
- First Name
- Jake
- Truck Year
- 85
- Truck Model
- k10
- Engine Size
- 350
Hey I've got an aftermarket harness hooked up to my truck and the high and low beam come on at the same time. This has been fine for me as I just unhooked the high beams and used only low but it is inspection time and I have to show high and low. I noticed the new harness only plugs in to one of the old trucks headlight plugs(3prong) and Im guessing I will have to rewire the harness to plug into one of the 2 prong plugs. When i pull the headlight switch only running lights will come on until I hit the brights switch on the steering column and then low and hi beam come on.
Anyone have experience with this, or am I right in assuming I will have to rewire so the brights plug into the old plug?
I will attach a photo of the harness
Anyone have experience with this, or am I right in assuming I will have to rewire so the brights plug into the old plug?
I will attach a photo of the harness
You must be registered for see images attach