Chuck
Full Access Member
- Joined
- Oct 4, 2013
- Posts
- 156
- Reaction score
- 0
- Location
- Grande prairie
- First Name
- Chuck
- Truck Year
- 81
- Truck Model
- K30 crew cab
- Engine Size
- 6.2
This is the truck I got for free. 4
8 inch blocks front and back came with dana 44 12 bolt and welded 14 bolt ff with 42 inch vtreads. I pulled the motor 350 cammed it with torque cam and intake. Still have to replace bottom bearings. Grabbed a dodge dana 60 for 150 gonna drop that in and weld the collar in place. Installing the 52s 10 lifted out of my 81. I plan to run 63s with lowered hangers to match the front. Gon at do cross over witch will be easy cause dodge already run cross over. I am in the middle of making hydro assist for both trucks combine steering rams cheap from the tractor junk yard.
Sent from my iPhone using Tapatalk
8 inch blocks front and back came with dana 44 12 bolt and welded 14 bolt ff with 42 inch vtreads. I pulled the motor 350 cammed it with torque cam and intake. Still have to replace bottom bearings. Grabbed a dodge dana 60 for 150 gonna drop that in and weld the collar in place. Installing the 52s 10 lifted out of my 81. I plan to run 63s with lowered hangers to match the front. Gon at do cross over witch will be easy cause dodge already run cross over. I am in the middle of making hydro assist for both trucks combine steering rams cheap from the tractor junk yard.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Sent from my iPhone using Tapatalk