4hi popping out

[royc]

does anyone know why 4 hi pops out constantley have to hold in
place? what do i need to fix it thanks in advance roy

 

[royc]

forgot manuel hubs 208 just use it for when it snows thanks again

 

[bucket]

Could be worn body mounts or worn engine/trans mounts.

 

[crazy4offroad]

Shifter linkage needs adjusted.

 

[bucket]

Shifter linkage needs adjusted.

I agree with you, but wouldn't the fact that it pops out while driving often mean the t-case or body is moving around?

 

[crazy4offroad]

Not always. That blue 83 I had last year kicked out of 4-Hi all the time. The guy I sold it to said they adjusted the t-case shifter linkage and fixed it.

 

[royc]

who needs a machanic with U guys around thanks again roy

 

[chengny]

1. Position transfer case shift lever in 4 Hi detent.
2. Push lower shifter lever forward to 4 Hi stop, then install rod swivel into shift lever hole.
3. Install 0.200 inch gage behind swivel as shown.
4. With shifter against 4 Hi stop, tighten rod nut (A) until it contacts gage.
5. Remove gage, then push swivel rearward against nut (A) and tighten nut (B).

You must be registered for see images attach