ROYBOY
Junior Member
- Joined
- Feb 2, 2018
- Posts
- 6
- Reaction score
- 0
- Location
- Palmdale, Calif,USA
- First Name
- ROY
- Truck Year
- 1982
- Truck Model
- K30
- Engine Size
- 454 CID
will look into this intake. Thanks
1982 calif 454
- Thread starter ROYBOY
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Craig 85
Full Access Member
- Joined
- Jan 25, 2017
- Posts
- 3,897
- Reaction score
- 4,043
- Location
- Nashville, TN
- First Name
- Craig
- Truck Year
- 1985
- Truck Model
- K30 SRW
- Engine Size
- 454/TH-400/NP205
FYI this intake won't work with peanut port heads, only oval ports. Mine has peanut ports.
The other thing to check as you are hooking up smog equipment is the condition of the vacuum lines and all the ported vacuum swithces. My truck had been off the road since 1998 and I didn't want to take a chance on any of that stuff being bad. I replaced all of the sensors. I even changes the vacuum pod on the air cleaner snorkel and the heat sensor inside just to be safe. I know your truck is a stick, so some parts may be different, but I have all the part numbers if you need to replace anything.
