Search results

  1. C10_Blackie

    Busted Alternator Bolt

    Sorry for taking so long to get back to you - I haven't logged in in a while. I see Rob already answered and yeah, it's still at the shop and there are a number of issues that will have to be dealt with. Rob has been busy - as he said - but I've assured him that I'm in no rush at all. Rob has...
  2. C10_Blackie

    Spray vs Plastic Bedliner

    That’s not a bad idea, and I’ll give that some thought.
  3. C10_Blackie

    Spray vs Plastic Bedliner

    Thanks to everybody so far - you've been a lot of help. Aside from resolving any safety issues my first priority is to get the bed figured out so i can start using it for spring projects.
  4. C10_Blackie

    Spray vs Plastic Bedliner

    Thanks. I'm leaning towards Line-X with the UV protection.
  5. C10_Blackie

    Spray vs Plastic Bedliner

    Thanks for that. I was specifically wondering about how the bed would weather under a plastic liner if moisture got in there.
  6. C10_Blackie

    Busted Alternator Bolt

    Quick follow-up: I made it to the shop, but just barely. I did a couple of short test drives and my temporary fix held just fine but when I set out on the actual trip to the shop it dropped the belt in the first couple of miles. I didn't notice anything much with the gauges until I was on the...
  7. C10_Blackie

    Greetings from Seattle

    A quick follow-up - I ended up taking it to Rob over at Luke's in Redmond and he's been giving it a look. So far he's been able to tell me that it's a keeper so I've got a service manual on order and here we go...
  8. C10_Blackie

    New here from the Wet Coast of Canada

    Welcome from Seattle. I'm new too and just bought an '81 C10. You've got me re-thinking going with a stock grille - that looks great.
  9. C10_Blackie

    Spray vs Plastic Bedliner

    I have a 1981 long bed fleetside C10. The prior owner had an OK paint job done on the exterior but seems to have applied some sort of bed liner material himself and because of poor material and/or workmanship it didn't last hardly at all. So there's original paint showing through in many places...
  10. C10_Blackie

    Busted Alternator Bolt

    And here I was thinking that I was just going to enjoy many years of mostly bolting new aftermarket parts on. I'm almost glad the truck decided to remind me that stuff like this happens. And that was the last time I go anywhere in this truck without a good selection of tools.
  11. C10_Blackie

    Busted Alternator Bolt

    Let's hope that is the case. If I hadn't been able to come up with a temporary solution the next thing I would have tried was some more penetrating oil and a screw extractor before giving up, but the way bolts tend to seize up in heated applications made me doubtful that anything other than...
  12. C10_Blackie

    Busted Alternator Bolt

    It is really hard to see, but mine looks more similar to hers. I don't know the names of things so have to make stuff up as I go, so what I'm going to call the 'tensioner' bracket is fixed to the head and then a bolt attaches the bracket to the alternator with a bolt that allows it to slide and...
  13. C10_Blackie

    Busted Alternator Bolt

    Yeah, what you said earlier gave me the impression that you understood what I did from the get-go and after a few more short test drives nothing has loosed up. Thanks also for confirming my suspicions that this isn't something I want to leave this way for too long. I'm also with you on the...
  14. C10_Blackie

    Busted Alternator Bolt

    Thanks for all the great responses! Here's what I did (pics attached). You can see the new bolt, washers and nuts I installed in the wide and close-up shots at the bottom of the alternator to the right of that interestingly-placed (at least to me) gas filter. So I had pulled off the bracket and...
  15. C10_Blackie

    Busted Alternator Bolt

    I’ll take some pics tomorrow. Thanks.
  16. C10_Blackie

    Busted Alternator Bolt

    Hi all. Sorry about the length of the post but I didn't take any time to take photos while this was happening. I have a 1981 C10 with what i think is a Goodwrench crate 350 motor of unknown age and origin. I'm not an experienced or knowledgeable mechanic. I bought the truck in December. I...
  17. C10_Blackie

    Chevy C10 "Build"

    Yeah, I think the problem is that I may be turning into my dad. Lately I just can't seem to bring myself to replace anything unless it is irredeemably broken or actually on fire.
  18. C10_Blackie

    Chevy C10 "Build"

    So what's my point? What I was thinking is that I'd like to someday get my truck looking like that truck looked like when he first pulled it in to the garage. And remember, I had the volume off so I didn't know what he was saying as he went along. So then he starts swapping out the suspension...
  19. C10_Blackie

    Chevy C10 "Build"

    I realize that this forum is for other vehicles but what I came across doesn't seem to fit elsewhere... So I'm new to Square Body trucks and just bought an '81 C10 a few weeks ago. It has a lot of common issues and I've had a lot of luck going out on YouTube and watching people's videos on how...
  20. C10_Blackie

    2003 Acura MDX

    I had a grey 2001 MDX with the tech package until 2020. There was actually nothing wrong with the car when I decided to replace it, but it seemed like a good time to buy (like a month before prices turned out to skyrocket) and I wanted to take advantage of modern safety features. What did I get...
  21. C10_Blackie

    Triple X Rootbeer Chevy Truck Show Photos

    Good question. I requested to join two weeks ago and never got a response. Their website looks a bit out of date as well.
  22. C10_Blackie

    Greetings from Seattle

    Will certainly do. I notice you said you were a Michigan transplant in another thread - me too: migrated out here in 1995, originally from the Birmingham area.
  23. C10_Blackie

    New guy here!

    Welcome. What a great find!
  24. C10_Blackie

    Greetings from Seattle

    Yeah, I was the first responder and luckily the seller was really good about giving me first crack at it or it would have devolved into a bidding war. There was (and I think still is) a really nice 1979 C30 for sale on San Juan Island. The seller is a super guy. He met me in Anacortes and I...
  25. C10_Blackie

    Greetings from Seattle

    Thanks for the info. Never occurred to me to ask about shops and I’ve already gotten one or two leads to follow up on.

Latest posts

Forum statistics

Threads
42,249
Posts
912,158
Members
33,752
Latest member
nastylsz
Top