Search results
-
O
SBC 355 Pressure Under Valve Covers???
Fresh rebuilt motor with less than 100 miles on it. My issue is this- what would be causing pressure under the valve covers? At idle there seems to be no pressure, but once rpms raise up the pressure increases and pushes oil past grommets and out the breather cap. Could a valve be staying open...- Ozie P
- Thread
- Replies: 5
- Forum: Engine & Performance
-
O
SBC Centerbolt Valve Covers
Okay, first things first. I’m at wits end searching. I need a set of Centerbolt (Vortec style) valve covers with a breather hole and baffle. I want fabricated covers. There’s plenty of people to make them without a breather hole but I need one. Any help is appreciated. Sent from my iPhone...- Ozie P
- Thread
- Replies: 3
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
-
O
700R4 and Correct Gearing
I need some tranny and gearing gurus to chime in as much as possible. Going to try and keep this short and to the point. Specs are this -84 K10, right at 500hp 5.7, NP208, and 700R4. I had originally had someone build a 700R4 setup for this motor yet, had some driveline issues and busted the...- Ozie P
- Thread
- Replies: 38
- Forum: Automatic Transmission
-
O
700r4/NP208C with 4:88 Gears
Truck used to have 37s. Went to 33s on my weld wheels. I’ve heard that low gears and 700r4 trannys don’t get along. Other than high rpms in overdrive, don’t seem to have any issues. Any input? Sent from my iPhone using Tapatalk- Ozie P
- Thread
- Replies: 8
- Forum: Automatic Transmission
-
O
84 K10 throttle cable
Throttle cable seems to have slack and not pulling the carb to WOT. Doesn’t seem to have a way to adjust from the firewall to carb link. Is there another way to adjust or anyone have any ideas? Or should I look into an aftermarket one? Thanks in advance! Sent from my iPhone using Tapatalk- Ozie P
- Thread
- Replies: 4
- Forum: Engine & Performance
-
O
Driver Bed Side Sagging???
In my 84 K10 SWB, it’s has about an 1.5” lower height to the driver side of the bed. It has a 6” Skyjacker Suspension lift on it but the shocks have definitely had their share of life. I made the assumption of it being spring sag in on the driver side so I swapped the rear springs out for some...- Ozie P
- Thread
- Replies: 33
- Forum: Suspension, Steering & Brakes
