manual hub conversion problems

4WDKC · Apr 22, 2018

Anyone ever have issues putting the manual hub back in the hub itself? These parts.

You must be registered for see images attach

Craig 85 · Apr 22, 2018

No, but make sure to push the axle shaft forward from the back. Sometimes they slide and your can't install the retaining clip.

highdesertrange · Apr 24, 2018

what's the problem exactly? they came out, right? highdesertranger

4WDKC · Apr 24, 2018

highdesertrange said:
what's the problem exactly? they came out, right? highdesertranger

No it was a full time 4wd axle that I cleaned up and added new ball joints axle u joint, then converted to manual hubs. Problem appears to be because the spindle was turn forcing axle to be not on center.

highdesertrange · Apr 24, 2018

the axle should have a little slop in it. you should be able to move the stub axle around. you should start the hub on axle then move the rotor as you push the hub in. highdesertranger

manual hub conversion problems

4WDKC

Full Access Member

Craig 85

Full Access Member

highdesertrange

Full Access Member

4WDKC

Full Access Member

highdesertrange

Full Access Member

Similar threads

Latest posts

Forum statistics