Recent content by TIC

  1. T

    its been a year and a half

    its been a year and a half since i took out my 700r4, and replaced it with a th350. witch lost reverse about a month later, other than no reverse, its been a good tranny, no leaks, good firm shift. just goota be carefull were you park. i do miss overdrive, and lower 1st gear. so next week im...
  2. T

    th350 broke in reverse

    thanks for the info.
  3. T

    th350 broke in reverse

    i do have 1st. whats eating at me is why it was binding in the 1st place, i know i did something wrong, is it possible a forward clutch was engageing at time reverse clutch was locking up? i doubt if disassembling would show why. you could tell there was some conflict going on when in reverse...
  4. T

    th350 broke in reverse

    back in Oct. i rebuilt a 74 mod. th350 tranny, useing hotrods excellent photo in structions, the build went well, no leaks, shifted perfect. the only thing i noticed was when i was in reverse and tried to move backwards it felt like it didn't want to move, till you gave it enough gas, like...
  5. T

    My TH350 Rebuild

    [/IMG]heres some pictures of spring depresser. i wouln't call them tools, just a means toward an end. when i was done i through the wood back in the scrap pile.
  6. T

    My TH350 Rebuild

    this is my 2nd attempt to reply to your question, i gave a long instuction on how to fabricate a simple spring depreser and other tips. but when i hit post reply it said i wasn't logged in , when i was. so then i logged in again, and it lost the whole thing. so to answer your question, one day...
  7. T

    My TH350 Rebuild

    i just finished a th350 rebuild. my 2nd tranny build. my 1st was a 700r about 6 yrs ago. this time i put the manuel aside and followed hotrod build in this section. piece of cake. but good luck trying to get anyone to give you timely advice.
  8. T

    no power in reverse

    just finished th 350 shift kit and total rebuild. and swapped out 700r put in th350. seems to be doing pretty good, the shifts are kinda harsh, and sifts a little to soon for towing, gonna put the modulater spring back in to smooth things out and change springs in gov. for later shifts. the only...
  9. T

    Turbo 350 Build

    i didn't have an alignment band for the pump, and already had the rest put back to gether so i couldn't flip it over and put it in the case, so i looked around for something to fit the bolt holes, i came across some hinge pins from a 94 S10 blazer they fit nice and tight in the bolt holes, in...
  10. T

    Turbo 350 Build

    first i just wanna say your post of this tranny build is a great piece of work. that kind of info is priceless. i spent the past two days building my th350. had my laptop on the bench and followed your build step by step. i can't thank you enough for all the hard work to produce. if your ever in...
  11. T

    TH350C to TH350 swap

    i just ordered a 350 rebuild kit and shift kit on ebay the seller is transparts warehouse. the shift kit has an option with it to convert a 350c to a 350. hasn't come yet, maybe by the end of the week. im going from a 700r to a 350.
  12. T

    4L80E Rebuild - Decent price or too much?

    you should build it yourself. i built my 700r out of desperation. i dont trust anybody to touch my stuff. i bought a manuel and when i was done and it worked. as far as special tools go, you be serprised what you will come up with. like to compress the spring on the low reverse, i clamped a...
  13. T

    what tranny rebuild kit do ya like?

    There's a lot of tranny building going on, but i dont see much talk on the kits. what kit did you use, were did you get it, why did you choose it. what do you look for in a kit. I've been looking at kits till my eye's bug. the best one's seem to be on ebay. i found one that has everything plus...
  14. T

    Adapt 4x4 Th350 in Place of 700r4

    i guess Tcase and torque converter share the same initials, i ment the torque converter bolt pattern. and do ya measure from the center of the bolt hole to the center of the Tconv. and double that to get the hole pattern # ?
  15. T

    Adapt 4x4 Th350 in Place of 700r4

    i went back and looked, couldn't find one word on how long the finished shaft was or how much you cut off.
See more

Latest posts

Forum statistics

Threads
42,177
Posts
910,751
Members
33,673
Latest member
jcuriel512
Top