I want to do some aftermarket headlights on my 89 suburban and my 78 pickup. The suburban is the dual side by side lights and the 78 pickup are the round ones. What's your opinion on the style I should get or if you already have some on yours what kind do you have?
I have a 1978 chevy k20 4x4 that I'm doing a 4 inch lift on with 35s. I'm not sure what shock size I will need. I dont think I need anything heavy duty due to I have the stiff 5 leaf springs in the front and over loads in the rear. I found a set of pro comps ES1000 series... Extended length is...
I just mounted new led lights on the bottom of my 89 suburban and I'm trying to run them with the dome lights but I can't figure out how to wire them in. I've tried the door switch and that wasn't working. The led lights have power and ground wires running off of them. Any ideas on how I can...
Ok so I found out the issue with my auto hubs. The shop I had do my wheel bearings didn't install my driver side auto hub right. So I just took the auto hubs off and put manual hubs in it. Fixed the issue. Thanks everyone for the help.
I just talked to a guy at a transmission shop he said the automatic locking hubs are the issue there's something going out inside that's causing it to lock the front axle he recommended putting manual hubs in it. I will try that this weekend and see if that will fix the issue
I drive a 89 suburban v2500 stock no lift or over size tires. It has the 700r4 and np208 tcase. The issue I'm having is while I'm driving the auto hubs want to lock in. I have to pull over put it into 4hi and back into 2hi to get it to stop. The last few weeks it's been doing it more. I'm not...